We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Keyence AP-C33W , reach FAMAGA, the world's the best vendor of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of products and personalseparate attention to each buyer. We value everyone, who engaged with us - hence, our regular purchasers procure the most helpful purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such customers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Equatorial Guinea, Oman, Sri Lanka, Slovakia, Cuba, Liberia, Bahamas, Moldova, Mexico, Vietnam, Singapore, China, Honduras, Canada, Saudi Arabia, Romania, Tonga, Djibouti, Guyana, Uruguay, Dominica, Monaco, Suriname, Nigeria, Tajikistan, South Sudan, Mauritania, Mozambique, Angola, Botswana, Togo, Antigua and Barbuda, Kuwait, Mongolia, Latvia, Indonesia, Albania, Belarus, United Arab Emirates, Panama, Samoa, Nepal. A well-shaped logistics connection and a partnership network cheer us to send our elements anywhere in the world on-time without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Model | AP-C33W | |
Type | Positive pressure | |
Rated pressure | 0 to +1.000 MPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
Display resolution | Normal mode: 0.001 MPa, Focus mode: 0.1 kPa | |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
Control output | NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Pressure port | Rc (PT) 1/8 180 ° rotation | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
Environmental resistance | Pressure resistance | 1.5 MPa |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
Accessories | Power supply cord (2-m with connector), Unit seal | |
Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |