We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence AP-C30W , contact FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each purchaser. We appreciate everyone, who joined with us - therefore, our regular buyers procure the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Algeria, Singapore, Italy, Chile, Bahamas, Gambia, Papua New Guinea, Brazil, Afghanistan, Switzerland, Romania, Cape Verde, Canada, Oman, Chad, Eritrea, Andorra, China, Nicaragua, Central African Republic, Syria, The Bahamas, Sweden, Iceland, Monaco, Russia, Belarus, Seychelles, The Gambia, Benin, Djibouti, Tunisia, Nepal, Laos, Madagascar, Brunei, Finland, Burkina Faso, Vietnam, United Arab Emirates, Pakistan, Morocco. A well-elaborated logistics connection and a partnership network allow us to send our goods anywhere in the world as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | AP-C30W | |
Type | Multi range | |
Rated pressure | Negative pressure mode: 0 to -101.3 kPa Positive pressure mode: 0 to -100.0kPa Compound pressure mode: +101.3 to -101.3kPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
Display resolution | Multi range: Negative/Positive 0.1 kPa, Compound 0.2 kPa | |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
Control output | NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Pressure port | Rc (PT) 1/8 180 ° rotation | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
Environmental resistance | Pressure resistance | 500 kPa |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
Accessories | Power supply cord (2-m with connector) | |
Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |