We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
AP-C31W
Type
Process Sensor
Description
Modell AP-C31W Typ Unterdruck Nenndruck 0 bis -101,3 kPa Flüssigkeitstyp Luft oder nicht korrosive Gase Überdrucktyp Anzeige 3 1/2-stellig, 2-farbig, 7-Segment-LED (Zeichenhöhe: 11 mm), Display Zyklus: 10 mal / s Betriebsanzeige Rote LED x 2 (entspricht Steuerausgang 1 und 2) Leistungsaufnahme Normal 12V: 720mW (60mA) oder weniger, 24V: 960mW (40mA)
Stock availability:
On request
If you are inspecting Keyence AP-C31W , communicate with FAMAGA, the world's influential vendor of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and particular attention to each purchaser. We esteem everyone, who collaborated with us - hence, our regular buyers procure the most acceptable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Sierra Leone, Eritrea, Cuba, Israel, Slovenia, Turkmenistan, Colombia, Slovakia, Madagascar, Togo, Netherlands, Luxembourg, Singapore, Romania, Gambia, Japan, Eswatini, Estonia, South Sudan, Bangladesh, Mauritius, Nicaragua, Syria, Laos, Guyana, Angola, South Korea, Mexico, Jamaica, Ireland, Cape Verde, Malta, Suriname, Lithuania, Brunei, Swaziland, Pakistan, Poland, Bolivia, Switzerland, Benin, Sweden. A advanced logistics link and a partnership network cheer us to conduct our elements anywhere in the world on-time without discrediting product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Model | AP-C31W | |
Type | Negative pressure | |
Rated pressure | 0 to -101.3 kPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
Display resolution | Normal mode: 0.1 kPa, Focus mode: 0.01 kPa | |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
Control output | NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Pressure port | Rc (PT) 1/8 180 ° rotation | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
Environmental resistance | Pressure resistance | 500 kPa |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
Accessories | Power supply cord (2-m with connector) | |
Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |