We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence LS-9006M , contact FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of products and special attention to each purchaser. We appreciate everyone, who joined with us - therefore, our regular buyers procure the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Croatia, Seychelles, Costa Rica, Sri Lanka, Suriname, Togo, Namibia, Belize, Haiti, Papua New Guinea, North Korea, Singapore, Mauritius, Malaysia, Zimbabwe, Angola, Poland, Eswatini, Nicaragua, Saudi Arabia, Netherlands, Uzbekistan, South Sudan, Ecuador, Finland, Monaco, Uruguay, Djibouti, The Bahamas, Burundi, Argentina, Afghanistan, Malta, Swaziland, Slovakia, Cyprus, East Timor, United States, Morocco, Central African Republic, Egypt, Ghana, Serbia, Iceland, South Korea, Bosnia and Herzegovina. A well-elaborated logistics connection and a partnership network let us to send our units anywhere in the world promptly without discrediting product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LS-9006M*1 | |
Type | Head: Small-diameter model | |
Measurement range | 0.04 mm (0.01 mm) to 6 mm | |
Smallest detectable object | 0.04 mm (0.01 mm) | |
Transmitter/receiver distance | 60 ±5 mm | |
Repeatability | ±0.03 µm*2 | |
Measurement accuracy | ±0.5 µm*3 | |
Sampling cycle | 16,000 samples/sec.*4 | |
Transmitter/receiver direction and position detection | Detection area | 4 x 5 mm |
Smallest detectable object | 0.04 mm | |
Repeatability | ±0.02 mm*5 | |
Sampling cycle | 4,000 samples/sec. | |
Light source | InGaN green LED | |
Monitor camera | Provided | |
Environmental resistance | Enclosure rating | IP67 (including connector) |
Ambient light | Incandescent lamp/Fluorescent lamp: 3,000 lux or lower | |
Ambient temperature | 0 to +50 °C | |
Relative humidity | 20 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 15 G/6 ms | |
Material | Aluminum | |
Weight | Transmitter: Approx. 130 g Receiver: Approx. 300 g Base: Approx. 180 g | |
*1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. *2 A ±2? margin of error when measuring a o1.0 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. *3 Margin of error when a moving o1.0 mm rod is measured in the 2 mm x 4 mm measurement area using outer diameter mode. *4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. *5 A ±2? margin of error when measuring the position of a o1.0 mm rod in the centre of the measurement area with the average measurement number set as 512 times. |