We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence LK-G5001 , contact FAMAGA, the world's leading supplier of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each client. We appreciate everyone, who cooperated with us - therefore, our regular consumers receive the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Greece, Indonesia, Kuwait, Comoros, Sweden, Afghanistan, Malta, Botswana, Estonia, Cuba, Slovenia, Central African Republic, Haiti, Belize, Panama, Netherlands, Japan, El Salvador, Nicaragua, Uganda, Benin, South Sudan, Peru, Namibia, Qatar, Madagascar, Poland, Morocco, Togo, Latvia, Egypt, Iceland, Jamaica, Austria, Angola, Cameroon, Brunei, Costa Rica, South Korea, Suriname, Armenia. A well-built logistics system and a partnership network guide us to dispatch our items anywhere in the world on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LK-G5001 | |
Type | Separate type Main controller | |
Sensor head compatibility | Compatible | |
No. of connectable sensor heads | 2 | |
Display | Minimum display unit | 0.001 µm |
Display range | ±999.999 µm to ±9999.99 mm (7 settings selectable) | |
Display cycle | Approx 10 times/sec. | |
Display interface | Display port | Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected |
LED indicator | LASER ON | |
Terminal block | Analogue output voltage | ±10 V output, Output impedance: 100 ?*1 |
Analogue current output | 4 to 20 mA, Maximum load resistance: 350 ?*1 | |
No. of analogue outputs | 2*1 | |
TIMING 1 input | Non-voltage input*2 | |
RESET 1 input | ||
Auto-zero 1 input | ||
Laser remote input | Non-voltage input*1 | |
Alarm output | NPN open-collector output*1 | |
General comparator output | ||
Expansion connector | TIMING input | Non-voltage input*1 |
RESET input | ||
Auto-zero input | ||
Program switching input | ||
Binary selection input | ||
Alarm output | NPN open-collector output*1 | |
Comparator output | ||
Binary output | ||
RS-232C interface | Baud rate: 9600 to 115200 bps Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd | |
USB interface | USB 2.0 Hi-Speed compliant*3 | |
Ethernet interface | 100Base-TX/10Base-T*4 | |
EtherNet/IPTMinterface | Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14*5 | |
PLC-Link | The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IPTM, CC-Link, and DeviceNetTM cannot be used in conjunction with PLC-Link | |
Head expansion unit connector | Up to 10 head expansion units can be connected to one main controller | |
Expansion unit connector | Either of the CC-Link unit (LK-CC100) or DeviceNetTM unit (LK-DN100) can be connected | |
Power supply | Power supply voltage | 24 VDC ±10% |
Maximum current consumption | 0.6 A or less with 1 head/3.5 A or less with 12 heads | |
Environmental resistance | Ambient temperature | When one or less head expansion unit is connected: 0 to +50 °C. When two or more head expansion units are connected: 0 to +40 °C. |
Relative humidity | 35 to 85 % RH (No condensation) | |
Weight | Approx. 600 g | |
*1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to 'Precautions on wiring' in the User's Manual. *2 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to 'Precautions on wiring' in the User's Manual. This input is applied to all of the synchronised OUT. *3 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. *4 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. *5 The EtherNet/IPTM interface cannot be used when a CC-Link unit or a DeviceNetTM unit is installed. EtherNet/IPTM is supported by the latest controllers. For details on which controllers support EtherNet/IPTM , contact your nearest KEYENCE office. |