We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Keyence LK-081 , connect FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and personalseparate attention to each consumer. We understand everyone, who worked with us - therefore, our regular customers obtain the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Dominican Republic, Tunisia, Netherlands, Nicaragua, Denmark, Thailand, Honduras, Lesotho, Vietnam, Pakistan, Togo, China, Zambia, Albania, Kazakhstan, The Gambia, Sweden, Belarus, Latvia, Seychelles, Samoa, Moldova, Mexico, Brazil, Guyana, Angola, Morocco, Estonia, Norway, Costa Rica, Iceland, Panama, Russia, Yemen, Serbia, Madagascar, Turkey, Botswana, Libya, Cape Verde, Armenia, Burkina Faso, Bosnia and Herzegovina. A well-developed logistics bond and a partnership network guide us to deliver our items anywhere in the world on-time without compromising product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LK-081 | |
Type | Sensor head Standard Sensor head | |
Reference distance | 80 mm | |
Measuring range | ±15 mm | |
Light source | Type | Visible red semiconductor laser |
Wavelength | 670 nm | |
Output | 0.95 mW | |
Laser Class | FDA (CDRH) 21CFR Part 1040.10 | Class 2 Laser Product |
Laser Class | IEC 60825-1 | |
Spot diameter (at standard distance) | Approx. 70 µm | |
Linearity | ±0.1% of F.S. *1 | |
Repeatability | 3 µm*2 | |
Analogue output | Output voltage | ±5 V (3 µm/mV)*3 |
Impedance | 100 ? | |
Output current | 4 to 20 mA (Applicable load: 350 ? max.) | |
Alarm output | NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max. | |
Sampling cycle | 1,024 µs | |
Other functions | Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle | |
Temperature characteristics | 0.01% of F.S./°C | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Maximum current consumption | 400 mA max. | |
Environmental resistance | Enclosure rating | IP67 |
Ambient light | Incandescent or fl uorescent lamp: 10,000 lux max. | |
Ambient temperature | 0 to +50 °C (No condensation) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Aluminium die-cast | |
Weight | Approx. 385 g (including cable) | |
*1 Linearity was obtained using KEYENCE's standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503). *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output. |