We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence BL-1350HA , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular buyers obtain the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, South Korea, Myanmar, Cyprus, Lesotho, Angola, Guyana, Bangladesh, Belarus, Algeria, Madagascar, Romania, Monaco, Brunei, Iran, The Gambia, Haiti, Zimbabwe, Tunisia, Dominica, Ukraine, Benin, Nigeria, East Timor, The Bahamas, Seychelles, Swaziland, Cape Verde, Kenya, Ireland, Liechtenstein, Afghanistan, Moldova, Serbia, Vietnam, South Sudan, Mozambique, El Salvador, Nepal, Georgia, Indonesia, Turkey, Croatia, Burkina Faso. A well-elaborated logistics bond and a partnership network guide us to send our items anywhere in the world on-time without discrediting product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | BL-1350HA | ||
Type | High-resolution side type | ||
Type | Reading direction | Side | |
Scanning method | Single | ||
Laser | Light source | Visible red semiconductor laser (660 nm wavelength) | |
Control output | 85 µW | ||
Pulse duration | 112 µs | ||
Laser class | Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1) | ||
Reading | Supported codes | CODE 39, ITF, Industrial 2of5, Standard 2of5, COOP 2of5, NW-7 (Codabar), CODE 128, GS1-128, CODE 93, EAN/UPC, GS1 DataBar | |
Number of readable digits | 74 digits (148 digits with CODE 128 start character C) | ||
Readable bar width | 0.08 mm to | ||
Reading distance | 40 to 250 mm*2 (0.5 mm narrow bar width) | ||
Focal point | 65 mm | ||
Largest readable label width | 201 mm*2 (175 mm distance, 0.5 mm narrow bar width) | ||
PCS | 0.4 or more | ||
Scanning rate | 500 to 1,300 scans/second | ||
I/O specifications | Input terminals | Number of inputs | Two (IN1, IN2) |
Input format | non-voltage input (contact or solid-state) | ||
Output terminals | Number of outputs | Four (OUT1 through OUT4) | |
Output | NPN open collector | ||
Rated load | 24 VDC, 30 mA | ||
Leakage current (at OFF) | 0.1 mA or less | ||
Residual voltage (at ON) | 0.5 V or less | ||
Serial interface | Communication method | Conforms to EIA, RS-232C | |
Communication speed | 600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps | ||
Synchronisation between the transmitter and receiver | Asynchronous | ||
Data bit length | 7/8 bits | ||
Stop bit length | 1/2 bits | ||
Parity check | None/Even/Odd | ||
Rating | Power voltage | 5 VDC ±5 % | |
Voltage consumption | 400 mA or less | ||
Environmental resistance | Enclosure rating | IP65 | |
Ambient light | 10,000 lux (sunlight), 6,000 lux (Incandescent lamp) | ||
Operating environment | No dust or corrosive gas present | ||
Ambient temperature | 0 to +45 °C | ||
Storage temperature | -20 to +60 °C | ||
Relative humidity | 35 to 85 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | ||
Weight | Approx. 130 g | ||
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Specifications for 500-scan/second operation Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. Internal body settings are written in the internal memory area (can be rewritten 100,000 times). |