We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence FS-V22R , contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular clients get the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Burundi, Albania, Luxembourg, Chad, Brunei, Mozambique, Cameroon, United States, Singapore, Georgia, Slovenia, Nicaragua, Mongolia, Senegal, Guinea, Suriname, Nepal, Dominica, Tajikistan, The Bahamas, Ecuador, Fiji, Haiti, South Korea, South Sudan, Switzerland, Croatia, Madagascar, Sweden, Ireland, Paraguay, Vietnam, Botswana, Bosnia and Herzegovina, Afghanistan, Guatemala, Jamaica, Bulgaria, Cyprus, El Salvador, Kiribati, Zimbabwe, Tunisia, Finland, Uganda. A advanced logistics chains and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FS-V22R | |
Type | 1-line expansion unit, NPN | |
Light source | Red LED | |
Response time | 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED) | |
Output selection | Light-ON/Dark-ON selectable | |
Indicator lamp | Operation indicator: Red LED Dual digital monitor: Dual 7-segment display [Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 65,520, Excess gain: 0 P to 999 P] Hold function: Possible to display both peak and bottom hold values. Bar LED monitor: Possible to display together with Current Value Excess gain displayed (85 to 115 % in 7 steps) | |
Detection mode | Light intensity/rising edge/falling edge | |
Shift function | Max. ±1,999 (variable) | |
Timer function | Mode | Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable |
Variable range | 1 to 500 ms [1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)] | |
Accuracy | ±10 % of the Preset Value | |
Control output | NPN open-collector 20 mA max. (40 VDC max.), Residual voltage: 1 V max. | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Normal | S-APC OFF: 650 mW max. (27 mA max. at 24 VDC), S-APC ON: 720 mW max. (30 mA max. at 24 VDC)*1 |
ECO half | S-APC OFF: 530 mW max. (22 mA max. at 24 VDC), S-APC ON: 600 mW max. (25 mA max. at 24 VDC)*1 | |
ECO all | S-APC OFF: 480 mW max. (20 mA max. at 24 VDC), S-APC ON: 550 mW max. (23 mA max. at 24 VDC)*1 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*2 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Weight | Approx. 45 g (including 2-m cable) | |
*1 S-APC will be always turned ON when the high-resolution or high-speed mode is selected. S-APC is by default set to OFF in any other mode. *2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: –10 to +50 °C 11 to 16 Units: –10 to +45 °C |