We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence FS-V1 , contact FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each purchaser. We appreciate everyone, who joined with us - therefore, our regular clients procure the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Bahrain, Eswatini, Mauritania, Ireland, Jordan, East Timor, Swaziland, Ukraine, Seychelles, South Sudan, Switzerland, Monaco, Croatia, Niger, Sudan, Canada, Zimbabwe, Romania, Jamaica, Andorra, Malaysia, Liechtenstein, Brunei, Qatar, Albania, Djibouti, Dominica, Gambia, Comoros, Australia, Peru, Poland, Suriname, Mexico, Bolivia, Bangladesh, Estonia, Panama, Mali, Cyprus, Kenya, Belarus, Philippines. A advanced logistics connection and a partnership network allow us to conduct our goods anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FS-V1 | |
Type | Main unit | |
Output | NPN | |
Light source | Red LED | |
Response time | 250 µs | |
Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
Indicator lamp | Display indicator (Two): Red LED Received light display: LCD (Two colour display: Red and green) Calibration indicator: Orange LED | |
Timer function | ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable) | |
Control output | NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max. The FS-V1P is equipped with two outputs. | |
Protection circuit | Reversed polarity protection, Overcurrent protection, Surge absorber | |
Unit expansion | Up to 16 expansion units can be connected (a total of 17 units)*1 | |
Mutual interference suppression | 4 | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less*2 |
Current consumption | 50 mA or less | |
Environmental resistance | Ambient light | Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Weight | Approx. 80 g | |
*1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F) *2 Neither the FS-V12 nor the FS-V10 can be used as a standalone unit. *3 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended |