We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
FS-T1P
Type
Mounting bracket
Description
Faseroptischer Verstärker PNP
Stock availability:
On request
If you are inspecting Keyence FS-T1P , get in touch with FAMAGA, the world's major retailer of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of outcomes and special attention to each user. We value everyone, who conspired with us - thus, our regular clients get the most flexible purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, South Africa, Vietnam, Hungary, Niger, Georgia, Equatorial Guinea, Iran, Djibouti, Paraguay, Belize, Ukraine, Uzbekistan, Tonga, Mauritania, Costa Rica, Bhutan, Bosnia and Herzegovina, Saudi Arabia, Malta, Panama, Andorra, South Sudan, Turkey, Denmark, Lithuania, India, Bangladesh, Guyana, Austria, Suriname, Zambia, Czech Republic, Central African Republic, Kazakhstan, Macedonia, Mauritius, Iceland, Tanzania, Benin, Eswatini, Togo, Israel, North Korea. A well-elaborated logistics bond and a partnership network guide us to send our units anywhere in the globe with no delay without damaging product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is rising every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To request or book, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | FS-T1P | |
Type | Main unit | |
Output | PNP | |
Light source | Red LED | |
Sensitivity adjustment/Mode selection | Button | |
Response time | 250 µs | |
Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
Indicator lamp | Output indicator: Red LED, Stable operation indicator: Green LED Calibration indicator: Orange LED | |
Timer function | ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable) | |
Input | Non-voltage input (contact, solid state) | |
Control output | PNP open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max. | |
Stability output | PNP open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max.*1 | |
Protection circuit | Reversed polarity protection, Overcurrent protection, Surge absorber | |
Unit expansion | Up to 16 expansion units can be connected (a total of 17 units)*2 | |
Mutual interference suppression | 4 | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 35 mA or less | |
Environmental resistance | Ambient light | Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Accessories | Fittings | |
Weight | Approx. 75 g | |
*1 Only the FS-T1 and FS-M1 can provide stability outputs. *2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F) *3 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended |