We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
FS-N41P
Type
Mounting bracket
Description
Verstärkereinheiten Kabeltyp Haupteinheit PNP
Stock availability:
On request
If you are seeking Keyence FS-N41P , make contact with FAMAGA, the world's influential vendor of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and personalseparate attention to each purchaser. We praise everyone, who worked with us - thus, our regular customers procure the most flexible purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such customers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Lebanon, Serbia, Ghana, Paraguay, Vietnam, Cuba, Algeria, Samoa, Iran, Andorra, Zambia, Tunisia, Kiribati, Belgium, Afghanistan, Malawi, Guyana, Belize, Ukraine, Estonia, India, Malaysia, Sudan, Armenia, Chile, Mali, Uzbekistan, Jamaica, Australia, Tajikistan, Slovakia, Turkey, Liechtenstein, New Zealand, Lithuania, Antigua and Barbuda, Moldova, Iceland, Poland, Nigeria, Finland, Montenegro, Macedonia. A well-shaped logistics network and a partnership network allow us to conduct our elements anywhere in the globe with no delay without compromising product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To ask a question or order, contact us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | FS-N41P | |
Type | Cable | |
Output type | PNP | |
Main unit/expansion unit | Main unit | |
Number of control outputs | 1 | |
Number of external inputs | ? | |
Light source LED | Transmitter side: Red, four-element LED (wavelength 660 nm) | |
Response time | 23 µs (S-HSPD*1) / 50 µs (HSPD*2) / 250 µs (FINE) /500 µs (TURBO) / 1 ms (SUPER) / 4 ms (ULTRA) / 16 ms (MEGA) / 64 ms (TERA) | |
Control output | Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) / 20 mA or less (when used as an expansion unit) Residual voltage: 1.6 V or less (output current 10 mA or less) / 2.2 V or less (output current 10 to 100 mA) | |
External input | Input time 2 ms (ON) / 20 ms (OFF) or longer*3 | |
Unit expansion | Up to 16 units (17 units connected in total including the main unit). However, each dual output type will be treated as two expansion units. | |
Protection circuit | Protection against reverse power connection, output overcurrent, output surge, and reverse output connection | |
Mutual interference prevention | S-HSPD/HSPD 0 units, FINE 4 units, TURBO/SUPER/ULTRA/MEGA/TERA 8 units (The mutual interference prevention values are twice those shown here when Double is set.) | |
Power supply | Power voltage | 10 to 30 VDC (including 10% ripple (P-P) or less) , class 2 or LPS*4 |
Current consumption | During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)*5 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux or less, sunlight: 30,000 lux or less |
Operating ambient temperature | -20 °C to +55 °C (no freezing)*6 | |
Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X, Y, and Z axes | |
Shock resistance | 500 m/s2 , 3 times each for X, Y, and Z axes | |
Case material | Main unit and cover: polycarbonate | |
Weight | Approx. 78 g | |
*1 Restrictions when S-HSPD is selected Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. *2 Restrictions when HSPD is selected Display Gain cannot be used. *3 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. *4 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. *5 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. *6 When expanded by 1 to 2 units: -20 °C to +55 °C. When expanded by 3 to 10 units: -20 °C to +50 °C. When expanded by 11 to 16 units: -20 °C to +45 °C. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifier has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space. |