We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence FS-N14N , contact FAMAGA, the world's leading supplier of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each client. We appreciate everyone, who cooperated with us - therefore, our regular consumers receive the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Argentina, Morocco, Swaziland, Nigeria, Bhutan, Cuba, Slovakia, Mauritius, Djibouti, Guatemala, United Arab Emirates, Finland, Netherlands, Iran, Fiji, Antigua and Barbuda, Malaysia, Peru, Mali, Samoa, Ukraine, Japan, Pakistan, Mexico, Belarus, The Gambia, Tanzania, Costa Rica, El Salvador, Comoros, Syria, Jamaica, Haiti, Egypt, Panama, Poland, Benin, Montenegro, Botswana, Niger, Suriname, Albania. A well-built logistics system and a partnership network guide us to dispatch our items anywhere in the world on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FS-N14N | |
Type | High functionality 2 output Cable | |
Output | NPN | |
Main unit/Expansion unit | Expansion unit | |
Control output | 2 NPN open collector 24 V, 1 output max: 100 mA or less, 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections), residual voltage 1 V or less | |
Monitor output (1-5 V) | - | |
External input | 1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.) | |
Response time | 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |
Multiple connections to Expansion units | Up to 16 units can be connected total (two output type is treated as two units) | |
Light source | Red, 4-element LED | |
APC | ON/OFF switchable (Factory setting: OFF) | |
Number of interference prevention units | 0 for HIGH SPEED, 4 for FINE, 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current Consumption | Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V) | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less |
Ambient temperature | -20 to +55 °C (No freezing)*2 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Both main unit and expansion unit housing material: Polycarbonate | |
Weight | Approx. 70 g | |
*1 Increases 100 mW (4.0 mA) for High Speed mode *2 One or two more units connected: -20 to +55 °C, 3 to 10 more units connected: -20 to +50 °C, 11 to 16 more units connected: -20 to +45 °C. When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting. |