We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence EX-V10P , connect FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and special attention to each user. We understand everyone, who conspired with us - therefore, our regular buyers accept the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Qatar, Guatemala, Sudan, Djibouti, Rwanda, Kiribati, Libya, Samoa, Senegal, Mali, Zimbabwe, Grenada, United States, Nicaragua, Cyprus, China, Peru, Serbia, Zambia, Seychelles, Angola, United Arab Emirates, Costa Rica, Burundi, Mexico, Czech Republic, Mauritius, Greece, Malaysia, Fiji, East Timor, Kuwait, Poland, Macedonia, Latvia, Morocco, Suriname, Burkina Faso, Comoros, Tajikistan, Slovakia. A well-elaborated logistics series and a partnership network guide us to send our items anywhere in the world on-time without discrediting product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | EX-V10P*1 | |
Type | Amplifier Unit PNP | |
Shape | o22 x 35 mm Cylindrical,threaded | |
Measuring range | 0 to 10 mm | |
A/D converting system | ? | |
Display range | -19999 to +19999 | |
Linearity | ±0.3% of F.S. | |
Resolution (No. of averaging measurements: 64) | 2 µm | |
Sampling rate | 40000 samplings max./sec. *2 | |
Display speed | 20 times/second | |
Display power | 7-segment 2-colour LED | |
Over-range alarm | ±FFFF is displayed. | |
Control input | Timing input | 10 to 30 V is applied. |
Reset input | ||
Auto-zero input | ||
Judgment output: Inhibit input | ||
Synchronization/external settings input | ||
Control output | PNP: Applied voltage, 10 to 30 V | |
Controloutput | Setting method | Upper/lower 2-level setting x 4 patterns (selectable) |
Control output | Signal | PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.) |
Controloutput | Response time | 0.075 ms (at maximum speed) |
OFF-delay time | 60 ms (ON/OFF selectable)*3 | |
Strobe output | PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.) | |
Control output | Alarm output | PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.) |
Analogue output voltage | Output voltage | ±5V |
Impedance | 100 ? | |
Response time | 0.075 ms (at maximum speed) | |
Temperature characteristics | 0.07% of F.S./°C *4 | |
Major functions | FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 240 mA or less | |
Environmental resistance | Ambient temperature | 0 to +50 °C |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 235 g | |
*1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials. *2 When the digital filter function is used, the sampling rate is 20000 sampling/sec. *3 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP output converter. *4 When the distance between the sensor head and the target is within 50% of the measuring range. |