We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Model | EX-V02*1 | |
Type | Amplifier Unit NPN | |
Shape | M10 x 18 mm Threaded | |
Measuring range | 0 to 2 mm | |
A/D converting system | ? | |
Display range | -19999 to +19999 | |
Linearity | ±0.3% of F.S. | |
Resolution (No. of averaging measurements: 64) | 0.4 µm | |
Sampling rate | 40000 samplings max./sec. *2 | |
Display speed | 20 times/sec. | |
Display power | 7-segment 2-colour LED | |
Over-range alarm | ±FFFF is displayed. | |
Control input | Timing input | NPN open-collector or non-voltage contact signal |
Reset input | ||
Auto-zero input | ||
Judgment output: Inhibit input | ||
Synchronization/external settings input | ||
Control output | NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input, Synchronous input, External setting input) | |
Controloutput | Setting method | Upper/lower 2-level setting x 4 patterns (selectable) |
Control output | Signal | NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) |
Controloutput | Response time | 0.075 ms (at maximum speed) |
OFF-delay time | 60 ms (ON/OFF selectable) | |
Strobe output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.) | |
Control output | Alarm output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.) |
Analogue output voltage | Output voltage | ±5V |
Impedance | 100 ? | |
Response time | 0.075 ms (at maximum speed) | |
Temperature characteristics | 0.07% of F.S./°C *3 | |
Major functions | FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 240 mA or less | |
Environmental resistance | Ambient temperature | 0 to +50 °C |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 235 g | |
*1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials. *2 When the digital filter function is used, the sampling rate is 20000 sampling/sec. *3 When the distance between the sensor head and the target is within 50% of the measuring range. |