We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence SL-C56H , make contact with FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of goods and special attention to each orderer. We praise everyone, who engaged with us - thus, our regular buyers pick up the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Belize, Mali, Mozambique, Slovakia, New Zealand, Burma, Palestine, Libya, Belgium, East Timor, Grenada, France, Kenya, Moldova, Armenia, Sudan, Mexico, Ghana, Iceland, Finland, Chile, Brunei, Algeria, Uzbekistan, Ecuador, Gambia, Djibouti, Rwanda, Burkina Faso, Zambia, North Korea, Albania, Burundi, Tunisia, Namibia, Jordan, Uganda, Iran, Yemen, Paraguay, Lithuania, Equatorial Guinea, Andorra, Sierra Leone, Eswatini, Mongolia, Thailand, Pakistan. A well-elaborated logistics network and a partnership network allow us to send our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | SL-C56H | ||
Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
Response time | 15 ms *1 | ||
Light source | Infrared LED (850 nm) | ||
Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
Detection capability | o25 mm (when the blanking function is not used) | ||
No. of beam axes | 56 | ||
Detection zone | 1100 mm | ||
Protection area | 1145 mm | ||
Detectingdistance | 0.3 to 9 m | ||
Operating distance/Beam width | |||
Beam axis interval | 20 mm | ||
Lens diameter | o5mm | ||
OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
Max. load current | 300 mA *2 | ||
OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
Leakage current | 100 µA maximum*3 | ||
Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
Load wiring resistance | 2.5 ? maximum*4 | ||
Approved standards | EMC | EMS | UL61496-1 |
EMI | FCC Part15 Class A | ||
Safety | UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508 | ||
Current consumption | Transmitter | 94 mA | |
Receiver | 95 mA | ||
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
Operating ambient temperature | -10 to +55 °C (No freezing) | ||
Storage temperature | -10 to +60 °C (No condensation | ||
Operating relative humidity | 35 to 85 % RH (No condensation) | ||
Storage relative humidity | 35 to 95 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
Material | Main unit case | Aluminum | |
Upper case/lower case | Zinc die-cast | ||
Front cover | Polycarbonate | ||
Weight | Transmitter | Approx 705 g | |
Receiver | Approx 775 g | ||
*1 OFF>ON return time is 125 ms. *2 Note the derating illustrated in the graph to the right when using PNP output. *3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |