We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Keyence SL-C44H , contact FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each user. We appreciate everyone, who conspired with us - therefore, our regular buyers accept the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Malaysia, Belarus, Bulgaria, Comoros, Haiti, Monaco, Eritrea, Yemen, Netherlands, Cuba, Singapore, Serbia, Poland, Pakistan, Honduras, Thailand, Morocco, Benin, Niger, Mexico, Central African Republic, Japan, Angola, Zambia, Madagascar, Kazakhstan, Guatemala, Bolivia, Brazil, Qatar, United Arab Emirates, Burkina Faso, Cyprus, Nicaragua, Mauritius, Uganda, Swaziland, Egypt, The Gambia, Djibouti, Croatia, Cape Verde, United States, East Timor, Chile. A well-elaborated logistics series and a partnership network allow us to send our goods anywhere in the world as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | SL-C44H | ||
Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
Response time | 15 ms *1 | ||
Light source | Infrared LED (850 nm) | ||
Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
Detection capability | o25 mm (when the blanking function is not used) | ||
No. of beam axes | 44 | ||
Detection zone | 860 mm | ||
Protection area | 905 mm | ||
Detectingdistance | 0.3 to 9 m | ||
Operating distance/Beam width | |||
Beam axis interval | 20 mm | ||
Lens diameter | o5mm | ||
OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
Max. load current | 300 mA *2 | ||
OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
Leakage current | 100 µA maximum*3 | ||
Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
Load wiring resistance | 2.5 ? maximum*4 | ||
Approved standards | EMC | EMS | UL61496-1 |
EMI | FCC Part15 Class A | ||
Safety | UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508 | ||
Current consumption | Transmitter | 84 mA | |
Receiver | 88 mA | ||
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
Operating ambient temperature | -10 to +55 °C (No freezing) | ||
Storage temperature | -10 to +60 °C (No condensation | ||
Operating relative humidity | 35 to 85 % RH (No condensation) | ||
Storage relative humidity | 35 to 95 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
Material | Main unit case | Aluminum | |
Upper case/lower case | Zinc die-cast | ||
Front cover | Polycarbonate | ||
Weight | Transmitter | Approx 570 g | |
Receiver | Approx 625 g | ||
*1 OFF>ON return time is 125 ms. *2 Note the derating illustrated in the graph to the right when using PNP output. *3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |