We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence SL-C30L , make contact with FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of goods and individual attention to each user. We praise everyone, who conspired with us - thus, our regular clients accept the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Cambodia, India, Montenegro, East Timor, Australia, Palestine, Tunisia, Equatorial Guinea, Saudi Arabia, Ecuador, Niger, Turkey, Rwanda, Turkmenistan, Haiti, Grenada, Bosnia and Herzegovina, Czech Republic, Afghanistan, New Zealand, Malawi, Antigua and Barbuda, Tanzania, Uzbekistan, Belarus, Uganda, Sweden, Austria, Lithuania, Mexico, Armenia, Mongolia, Bulgaria, Nigeria, The Gambia, Jordan, Burundi, Algeria, Kazakhstan, Norway, Mali, Kiribati, Argentina, Libya, North Korea, Madagascar. A advanced logistics series and a partnership network allow us to conduct our goods anywhere in the globe as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | SL-C30L | ||
Effective aperture angle | Max. ±2.5 ° (when operating distance is at least 3 m) | ||
Response time | 15 ms *1 | ||
Light source | Infrared LED (850 nm) | ||
Operation mode | Turned on when light is being applied to all optical axes (excluding when the blanking function is used) | ||
Detection capability | o45 mm*2 | ||
No. of beam axes | 30 | ||
Detection zone | 1160 mm | ||
Protection area | 1245 mm | ||
Detectingdistance | 0.3 to 9 m | ||
Beam axis interval | 40 mm | ||
Lens diameter | o5mm | ||
OSSD output | Output type | 2 outputs each for PNP and NPN, Can be switched using the connection connector cable | |
Max. load current | 300 mA *3 | ||
OFF-state voltage | 2.5 V (with a cable length of 7 m) | ||
Leakage current | 100 µA maximum*4 | ||
Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
Load wiring resistance | 2.5 ? maximum*5 | ||
Approved standards | EMC | EMS | UL61496-1 |
EMI | FCC Part15 Class A | ||
Safety | UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508 | ||
Current consumption | Transmitter | 73 mA | |
Receiver | 80 mA | ||
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | |
Environmental resistance | Enclosure rating | IP65 (IEC60529) | |
Ambient light | Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less | ||
Operating ambient temperature | -10 to +55 °C (No freezing) | ||
Storage temperature | -10 to +60 °C (No condensation | ||
Operating relative humidity | 35 to 85 % RH (No condensation) | ||
Storage relative humidity | 35 to 95 % RH (No condensation) | ||
Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
Weight | Transmitter | Approx 750 g | |
Receiver | Approx 825 g | ||
*1 OFF>ON return time is 125 ms. *2 If the SL-CL Series, which has a minimal detection object diameter of 45 mm, is used in conjunction with the SL-R12EX, the blanking function and muting function cannot be used. *3 Note the derating illustrated in the graph to the right when using PNP output. *4 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *5 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output |