We are not the manufacturer, authorised distributor or authorised representative of the JAUDT Dosiertechnik Maschinenfabrik brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

JAUDT Dosiertechnik Maschinenfabrik

Selling any product from the catalog JAUDT Dosiertechnik Maschinenfabrik at good prices

Vendor code
Description
Price
Aufgabenstellung Zellenradschleuse Schüttgut: Gips Durchsatzleistung kg/h : 50 000 Schüttgewicht kg/l : 1,1 ( bis 1,4 ) Füllungsgrad ca. % < 60 Theor. Leistung l/h : bei 100% Taschenfüllung > 75 800 Schüttgutkörnung : 0,6 - 2feinkörnig2- 5mittelkörnig5- 10grobkörnig=> vereinzelt bis 50 mm=> leicht zerdrückbar Verschleißverhalten gering ( Mohshärte <= 3 ) Fließverhalten rieselfähig ( mäßig, anklebend ) Schüttgutfeuchte % H2O < 8 % , Oberfläche trocken Umgebungstemperatur °C - 10 bis + 40 Produkttemperatur °C + 40 Druckverhältnisse dapa +/- 0 oberhalb der ZS +/- 0 unterhalb der ZS Schüttgut kommt von Trogkettenförderer dosierte Materialaufgabe in die Schleuse Austrag in Schneckenförder Einbauort im Gebäude Sonstiges Gips Standard-Ausführung Baustahl, auswechselbare Räumleiste und Dichtleisten aus Edelstahl ACHTUNG: Wegen dem groben Produkt ist unbedingt dafür zu sorgen, dass über ein Leit- blech o.ä. in den darüber montierten Geräten/Schurren das Material so ge- lenkt wird, dass dieses im Vorfeld in die Taschen fällt. Ansonsten besteht die Gefahr des Einklemmens von Material zwischen Dichtkante des Zellenrades und dem Gehäuse. Wir empfehlen wegen dem groben Gut zusätz- lich zur Absicherung eine Rutschkupplung einzusetzen da nicht sichergestellt werden kann, dass das ganze Grobgut im Vorfeld in die Taschen fällt. Wegen dem groben Gut haben wir ein 5 tasch- iges Zellenrad vorgesehen, das aufgrund der Taschenbreite mehr Material aufnehmen kann; außerdem wird das Ausräumen mit einem 1-flügeligen Paddel hier besser durchgeführt. 211-1803.10 ZSR 500x600/1250 1.0553 MB630569.3001 5 Taschen 174 L/U JAUDT ZELLENRADSCHLEUSE mit Räumrad Einlauf/Auslauf mm 500 x 600 Bauhöhe mm 1250 max. Betriebstemp. °C 50 max. Betriebsdruck MPa 0 Steuerspannung V 24 Werkszeugnis 2.2 nach DIN - EN 10204:2004 Gehäuse Schweißkonstruktion Baustahl Flanschbohrbild JAUDT Standard nach Maßblatt MB630569.3001 Lagerschilde Schweißkonstruktion Baustahl Außenliegende Lagerung Stopfdichtung nachstellbar Zellenrad Schweißkonstruktion Baustahl OHNE Randscheiben 5 Taschen Q2 = ca. 174 dm3/U Taschengrund ausgerundet R = 200 Dichtleisten Edelstahl 1.4301, auswechselbar Räumrad Räumpaddel Baustahl grundiert * Abstreifleiste aus Edelstahl 1.4301 Getriebe Zellenrad und Räumrad über 1-stufiges Stirnradgetriebe I=1:5 synchronisiert UVV Schutz Antrieb Kupplungsglocke u. elast. Kupplung Motor Drehstrom-Stirnradgetriebemotor SEW NennleistungNennspannungFrequenzSchutzartWärmeklasse Temperaturfühler:5 / 8: 121-0560 : 16.03.2021 (M > 500 Nm)230/40050IP 55F 3 x TF für Wärmeklasse F (ohne Auslösegerät) M 1 (Flansch) Rutschkupplung, AR112/W mit Adapter zwischen Getriebe und Motor incl. Impulsgeber und Drehzahlwächter Leistung Räumpaddeldrehzahl Zellenraddrehzahl Theor. Förderleistung bei 100% Füllung Zubehör : Lackierung :*50 10 104.400 min-1 min-1 dm3/h Zubehör Gegenüber Antrieb Impulsgeber - 4 Imp./U. - >IFM<, Typ DI6001 (JAUDT-Nr. 005600.0406) 10 - 36 V DC, PNP Schließer, IP 67, LED, 2m Kabel Stecker E10136 (JAUDT-Nr. 019600.0086) ohne Auslöse-/Schaltgerät Schutzgehäuse galvanisch verzinkt Lackierung sand strahlen Sa 2,5 Gehäuse, Lagerschilde RAL 1015 Kupplungsglocke RAL 1015 KH-Grundlack 50 μm KH-Decklack 40 μm Zellenrad grundiert 30 μm Edelstahlteile nach JAUDT Standard * blanke Stellen mit Tectyl konserviert DIN Teile nach Hersteller-Standard Antrieb nach Hersteller-Standard RAL 9005 Typenschild Edelstahl ==> Englisch und Russisch
On request
Get a price
Aufgabenstellung Flachschieber Schüttgut : proppants. Schüttgewicht kg/l : 1,8 Schüttgutkörnung mm : 0,6 - 1 Schüttgutkörnung mm : 0,06 - 0,6 Verschleißverhalten : schleißend Fließverhalten : frei fließend Umgebungstemperatur °C : -10 bis + 40 Produkttemperatur °C : +120 max. Schaltspiele : 10 pro Stunde Schließend : produktlos Schüttgut kommt von : Trommelsieb Schüttgut geht in : BIG-BAG Station Drücke daPa ( mm WS ) : +/- 0 oberhalb Schieber daPa ( mm WS ) : +/- 0 unterhalb Schieber Einbauort : im Gebäude Sonstiges : ----- FS140 300x300 P MB611555.4002 JAUDT FLACHSCHIEBER FS140 P Öffnungsweite mm : 300 x 300 Bauhöhe mm : 140 Hub-Richtung in : 300 max.Betriebstemp. °C : 150 Betätigungsdruck MPa : 0,6 - 1,0 max. Betriebsdruck MPa : 0 Steuerspannung V : 24 Werkstoff : Baustahl (Tmax 250°C) Rahmen : Blechkant-Schweißkonstruktion Flanschbreite 60 mm, Blech 6 mm unbearbeitet Produktraum : mit eingeschweißten, umlaufenden Abweisblechen * aus Hardox Arbeitsraum : Oberseite mit Blech 6 mm, durchgehend geschw. Unterseite mit Abdeckblech, 2 mm, verschraubt, gemäß UVV-Schutz Abdichtung : Stopfdichtungspackung nachstellbar zwischen Produkt- und Arbeitsraum Druckstücke/Deckel Aluminiumguß (Tmax 200°C) seitl. Deckel mit O-Ring Abdichtung, NBR (Tmax 100°C) Brillenpackung umlaufend Packungsmaterial ARAMID (Tmax 250°C) Schieberblech :* Hardox, galvanisch verzinkt Blech 8 mm Führung : auf Laufrollen Edelstahl 1.4305 (Tmax 500°C) Betätigung : pneumatisch mit Zylinder ø125 >JAUDT< doppeltwirkend aufbereitete, gefilterte Druckluft Zubehör : 5/2 - Wege-Elektromagnetventil >PARKER ORIGA< Typ PD34921-0233 24 V DC IP 65 G 1/4" JAUDT Art.-Nr. 013600.0022 montiert und verschlaucht mit Zylinder 2 Stk. Endschalter berührungslos AUF - ZU >Pepperl+Fuchs< Typ NBB5-18GM50-E2 10-30 V DC,IP 67,2m PVC Kabel,PNP-Schließer,LED-Anz. JAUDT Art.-Nr. 005600.0054 montiert und justiert Flanschbohrb. : nach JAUDT Maßblatt MB611555.4002 ( ist identisch mit MB6103XX.4XXX ) Lackierung :* Baustahl lackiert nach JAUDT Standard RAL 5021 * Abdeckblech unten für Arbeitsraum RAL 5021 KH-Grund- und Decklack je 30 μm Edelstahl nach JAUDT Standard DIN Teile nach Hersteller-Standard Typenschild (Aluklebeschild mit Schutzfolie) Geräte-Nr. : 611555.4002 - als Ersatz für 207-0514.20, aber jetzt mit Abweisblechen und Schieberblech aus Hardox, statt Naxtra
3270.67 €
ZS Vario 300x300/470 MB630155.3003 Einlauf/Auslauf mm : 300 x 300 Bauhöhe mm : 470 max. Betriebstemp. °C : 40 max. Betriebsdruck MPa : 0 Steuerspannung V : 24 Werkszeugnis 2.2 : nach DIN - EN 10204:2004 Gehäuse :* Schweißkonstruktion Edelstahl 1.4301 Flanschbohrbild nach JAUDT Standard Lagerschilde :* Schweißkonstruktion Edelstahl 1.4301 Außenliegende Lagerung Stopfdichtung nachstellbar Zellenrad :* Schweißkonstruktion Edelstahl 1.4404 * Ohne Randscheiben 8 Taschen ORS (2,4-fache Überdeckung) 27,5 l/U * Dichtleisten Edelstahl 1.4404, auswechselbar Antrieb : Kupplungsglocke u. elast. Kupplung Motor : Drehstrom-Stirnradgetriebemotor >SEW< geeignet für Betrieb am stat. Umrichter Nennleistung [kW] 1,1 bei Netzbetrieb 50 Hz Nennspannung [V] 230/400 Frequenz [Hz] 50 Frequenzbereich [Hz] 8,7 - 50 - 87 Schutzart IP 55 Bauform M 1 (Flansch) Wärmeklasse F Temperaturfühler 3 x TF für Wärmeklasse F (ohne Auslösegerät) Effizienzklasse IE3 Leistung : Frequenz 8,7 - 50 - 87 Hz Zellenraddrehzahl 2,7 - 16 - 27 min-¹ Theor. Förderleistung 4590 - 26400 - 45900 dm³/h bei 100% Füllung Zubehör : Gegenüber Antrieb Impulsgeber - 4 Imp./U. - >IFM<, Typ IIM210 (JAUDT-Nr. 005600.0493) 10 - 60 V DC, PNP Schließer, IP 67, LED, 6m Kabel ohne Auslöse-/Schaltgerät Schutzgehäuse galvanisch verzinkt Lackierung : Gehäuse, Lagerschilde, Zellenrad Edelstahl Kupplungsglocke RAL 5015 KH-Grund- und Decklack je 30 µm Edelstahlteile nach JAUDT Standard DIN Teile nach Hersteller-Standard Antrieb nach Hersteller-Standard RAL 9005 Typenschild Alu
On request
Get a price
ZS Vario 300/470 JAUDT rotary valve ZS Vario inlet / outlet mm : ø 300 overall height mm : 470 max. operating temp. °C : 60 max. operating pressure MPa : 0.01 control voltage V : test certificate ( WAZ ) : according DIN - EN 10204/2004 housing : cast iron flanges drilled according DIN 2501 PN 10 MB630109.3002 bearing plates : cast iron outboard bearings adjustable packing, tighten by thrust ring purging air ( prepared for ) feeder wheel : welded steel WITH boundry disks 10 pockets (covering 3-times) sealing strips of vulcanized-fabric, replaceable Q2 = approx. 23 dm³/U drive : coupling cage and elastic coupling motor : helical gear unit with AC squirrel-cage motor >SEW< suitable for operation on frequency inverter rated power [kW] 1.1 by power supply 50 Hz [kW] 1.5 by inverter supply 87 Hz rated voltage [V] 230/400 frequency [Hz] 50 frequency range [Hz] 8,7 - 50 - 87 protection class IP 55 mounting position M 1 (flange) thermal class. F thermistors 3xPTC for thermal class. F (without tripping relay) * lubrication CLP HC 150 (-30 / +50°C) * strip heater Anti-condensation heating * WITHOUT inverter * ambient temp. - 25 till + 40 °C * RAL 7031 rotary valve : frequency range 8,7 - 50 - 87 Hz no. of revoultions 3,3 - 20 - 33 min-1 theor. conveying capacity 4554 - 26220 - 45540 dm³/h by 100% pocket filling Accessories : impuls transmitter - opposite of drive - 4 imp./rev. inductive proximity switches >TELEMECANIQUE<, type XSA-V11801 24-240 V AC, 50-60 Hz / 24-210 V DC without tripping / control unit casing is galvanized ambient temp. - 25 till + 70°C colour : housing, bearing plates RAL 9001 coupling cage RAL 9001 Epoxy priming-coat each 40 µm intermediate-coat each 40 µm top-coat each 40 µm rotor primed 40 µm steal sealing strips preserved stainless steel parts at JAUDT Standard DIN parts at manufacturer standard * gear motor RAL 7031 type plate aluminium
On request
Get a price
ZS Vario 300/470 JAUDT rotary valve ZS Vario inlet / outlet mm : ø 300 overall height mm : 470 max. operating temp. °C : 60 max. operating pressure MPa : 0.01 control voltage V : test certificate ( WAZ ) : according DIN - EN 10204/2004 housing : cast iron flanges drilled according DIN 2501 PN 10 MB630109.3002 bearing plates : cast iron outboard bearings adjustable packing, tighten by thrust ring purging air ( prepared for ) feeder wheel : welded steel WITH boundry disks 10 pockets (covering 3-times) sealing strips of vulcanized-fabric, replaceable Q2 = approx. 23 dm³/U drive : coupling cage and elastic coupling motor : helical gear unit with AC squirrel-cage motor >SEW< suitable for operation on frequency inverter rated power [kW] 1.1 by power supply 50 Hz [kW] 1.5 by inverter supply 87 Hz rated voltage [V] 230/400 frequency [Hz] 50 frequency range [Hz] 8,7 - 50 - 87 protection class IP 55 mounting position M 1 (flange) thermal class. F thermistors 3xPTC for thermal class. F (without tripping relay) * lubrication CLP HC 150 (-30 / +50°C) * strip heater Anti-condensation heating * WITHOUT inverter * ambient temp. - 25 till + 40 °C * RAL 7031 rotary valve : frequency range 8,7 - 50 - 87 Hz no. of revoultions 3,3 - 20 - 33 min-1 theor. conveying capacity 4554 - 26220 - 45540 dm³/h by 100% pocket filling Accessories : impuls transmitter - opposite of drive - 4 imp./rev. inductive proximity switches >TELEMECANIQUE<, type XSA-V11801 24-240 V AC, 50-60 Hz / 24-210 V DC without tripping / control unit casing is galvanized ambient temp. - 25 till + 70°C colour : housing, bearing plates RAL 9001 coupling cage RAL 9001 Epoxy priming-coat each 40 µm intermediate-coat each 40 µm top-coat each 40 µm rotor primed 40 µm steal sealing strips preserved stainless steel parts at JAUDT Standard DIN parts at manufacturer standard * gear motor RAL 7031 type plate aluminium
On request
Get a price
On request
Get a price
On request
Get a price

The site contains only a small part of the catalog items JAUDT Dosiertechnik Maschinenfabrik.

If you have not found the article you need, send a request to the mail [email protected] and we will definitely send you a commercial proposal.

About the manufacturer

Affordable solutions for all your application demands - this single sentence can feature the crucial principle of FAMAGA. We are giving top-class industrial material and spare parts produced by JAUDT Dosiertechnik Maschinenfabrik. We are gratified of our high preference of top quality brands on the industrial store, which means that we can distribute any proportion, any capacity and any size of industrial items.

We are a team of professionals, who handle over 2000 demands daily and always offer appropriate solutions for your applications. We offer everything you desire for the growth of your industry. Due to our well-built logistics connection, we distribute your desirable product of JAUDT Dosiertechnik Maschinenfabrik in the quickest possible time at fair prices. If you think that your demand is overload, we have the strength to locate enough area for it. Therefore, we offer distribution of any scope, any density and any size industrial tools and spare parts made by JAUDT Dosiertechnik Maschinenfabrik.

Constantly, all products are checked before supply. Thanks to the vast portfolio of JAUDT Dosiertechnik Maschinenfabrik we are always ready to fulfill crucial needs of our consumers in order to accomplish customer satisfaction. We ensure the top-class logistics network of industrial equipment and spare parts of JAUDT Dosiertechnik Maschinenfabrik.

You dispatch an query and we provide a solution.

If you loss anything in your industry, do not pause to get in touch with us to

You can buy products of other brands