We are not the manufacturer, authorised distributor or authorised representative of the IFM brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
SN0150
Description
Control monitor for flow sensors
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Application | |||||||
|---|---|---|---|---|---|---|---|
| Application | Flow rate control, Temperature control, Wire break detection | < /tr>||||||
| Electronic data | |||||||
| Operating voltage tolerance [%] | -5…10 | ||||||
| Rated AC voltage [V] | 90…240 | ||||||
| Rated AC frequency [Hz] | 47…63 | ||||||
| Protection class | II | ||||||
| Reverse polarity protection | < td>no|||||||
| Power-on delay time [s] | 10…80, (setting (fixed resistors terminals 22-23)) | ||||||
| Number of channels | 1 | ||||||
| Outputs | |||||||
| Characteristic in case of error | In the event of undervoltage, all relays are de-energized, the LED "Low power/relay connection is broken" light | ||||||
| Electrical version< /td> | relay | ||||||
| Contact load | 4 A (250 V AC / 30 V DC) | ||||||
| Switching function flow rate monitoring | relay energised when flow is present and during the power-on delay time | ||||||
| Switching function temperature monitoring | Relay de-energized in case of wire break or short circuit | ||||||
| Relay de-energised in case of wire break or short circuit | |||||||
| Short circuit protection | none | ||||||
| Overcurrent protection | < td>none|||||||
| Response time | |||||||
| Response time [s] | < 3 | ||||||
| Software / Programming | |||||||
| Switch point setting | with potentiometer | Preset selection for liquids/gases | wire bridge, device factory setting: liquid media monitoring, for gaseous media monitoring: connect terminals 23 / 24. | ||||
| Threshold point setting | with potentiometer | ||||||
| Temperature range [°C] | 0…80 | ||||||
| Repeatability of set switch point [K] | 4 | < /tr>||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -20…60 | ||||||
| Ambient temperature note |
| ||||||
| Degree of protection | IP 20 | ||||||
| Tests / approvals< /th> | |||||||
| MTTF [years] | 168 | ||||||
| Mechanical data | Weight [g] | 252.5 | |||||
| Enclosure | Enclosure for DIN rail mounting | ||||||
| Dimensions [mm] | 100 x 25 x 103.5 | ||||||
| Material | PBT (polybutylene terephthalate) | ||||||
| Displays / Controls | |||||||
| Display |
| ||||||
| Electrical connection | |||||||
| Required protection | miniature fuse IEC60127-2 sheet 1, ? 5 A, fast response | ||||||
| Notes | |||||||
| Notes |
| ||||||
| Packing value | < td>1 piece|||||||
| electrical connection | |||||||
| Connection | Combicon connector: |
