We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CTP-L2-AP-U-HA-AZ-SA-124728
Part number
124728
Description
Transponder-coded safety switch CTP-AP, M12
Stock availability:
On request
If you are pursuing Euchner CTP-L2-AP-U-HA-AZ-SA-124728 124728, make contact with FAMAGA, the world's prime producer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of products and particular attention to each orderer. We appreciate everyone, who joined with us - thus, our regular purchasers obtain the most flexible purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Ecuador, Austria, Senegal, Brazil, Saudi Arabia, Bolivia, Honduras, Argentina, Czech Republic, Mongolia, Australia, North Korea, United Arab Emirates, Equatorial Guinea, Chad, Sudan, Swaziland, Denmark, Djibouti, Uganda, Suriname, Uzbekistan, Kuwait, Bulgaria, South Sudan, Kazakhstan, Mexico, Sierra Leone, Mauritania, Lithuania, Chile, Laos, Finland, Rwanda, Algeria, Mali, The Gambia, Montenegro, Ireland, Armenia, Andorra. A well-shaped logistics network and a partnership network allow us to dispatch our goods anywhere in the world immediately without compromising product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as stay in control.
To request or order, contact us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
CTP?L2 | Guard locking actuated by power-ON applied and spring released (open-circuit current principle). |
Plug connector (view of connection side) | Pin | Designation | Function | Conductor coloring of connecting cable |
---|---|---|---|---|
1 | IMP | Operating voltage of guard locking solenoid 24 V DC | WH | |
2 | UB | Operating voltage of AP electronics 24 V DC | BN | |
3 | FO1A | Safety output, channel 1 | GN | |
4 | FO1B | Safety output, channel 2 | YE | |
5 | OI | Diagnostic output | GY | |
6 | OD | Door monitoring output | PK | |
7 | 0 V UB | Operating voltage of AP electronics 0 V | BU | |
8 | IMM | Operating voltage of guard locking solenoid 0 V | RD |
Housing material | |
Safety switch housing | Fiber glass reinforced thermoplastic |
Switch head cover | Die-cast zinc |
Weight | |
Net | 0,42 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... +55 °C |
Degree of protection | IP67 / IP69 / IP69K |
Resilience to vibration | In acc. with EN IEC 60947-5-3 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Ready delay | max.1 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M12, 8-pin |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N |
Retention force | 20 N |
Extraction force | 20 N |
Actuating force | 10 N |
Overtravel | 5 mm |
Test-pulse interval | min.100 ms |
Test pulses | max.0,3 ms |
Operating voltage DC | |
UUB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Current consumption | |
IUB | 40 mA |
IIMP | 400 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 150mA |
Solenoid operating voltage DC | |
UIMP | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 2 A |
External (solenoid operating voltage IMP) | 0,5 ... 8 A |
Rated insulation voltage Ui | max.50 V |
Rated impulse withstand voltage Uimp | max.0,5 kV |
Power consumption | 6 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs FO1A / FO1B | |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output FO1A / FO1B | 1 ... 150 mA |
Output voltage | |
HIGH U(FO1A) / U(FO1B) | UB-1,5 ... UB V DC |
LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
Off-state current Ir | max.0,25 mA |
Switch-on time | max.400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms In acc. with EN IEC 60947-5-3 |
Monitoring output OD | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Monitoring output OI | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Performance Level | PL e |
Category | 4 |
PFHD | 4.1 x 10 -9 |
Mission time | 20 y |