We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET3-AP-CRA-AH-50F-SA-124601
Part number
124601
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET3-AP-CRA-AH-50F-SA-124601 124601, communicate with FAMAGA, the world's leading retailer of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We cherish everyone, who cooperated with us - thus, our regular customers obtain the most helpful purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such clients, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Burundi, Ghana, Thailand, Slovakia, Liberia, Djibouti, Oman, Brazil, Paraguay, Zambia, Uruguay, Andorra, Switzerland, Iraq, Gambia, Algeria, Nepal, Tanzania, Cape Verde, Sudan, Dominica, Liechtenstein, Morocco, Turkey, El Salvador, Montenegro, Latvia, Turkmenistan, Burkina Faso, Mali, Israel, Lithuania, Pakistan, Czech Republic, Sierra Leone, Argentina, Jamaica, Senegal, Egypt, Iceland, Eswatini. A advanced logistics link and a partnership network guide us to conduct our elements anywhere in the world as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To inquire or place an order, contact us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| CET3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | illuminates when the solenoid is energized |
| LED 2 gn | illuminates when door is closed |
| OUT | Monitoring output (semiconductor) |
| OUT D | Door monitoring output |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Resilience to vibration | In acc. with EN IEC 60947-5-2 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| Z | ±4 mm |
| Y | ±5 mm |
| X | ±5 mm |
| Ready delay | 1 s |
| Switching frequency | max.0,5 Hz |
| Connection | 1 plug connector M12, 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| LED | 24 V DC -15% ... 10% |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Current consumption | |
| ICM | 480 mA |
| IB | 80 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 8 A |
| External (solenoid operating voltage UCM) | 0,5 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Connecting cable | 30V DC, 2A |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
| Switching current | |
| Per safety output OA / OB | 1 ... 200 mA |
| Output voltage | |
| High U(OA) / U(OB) | UB-1,5V ... UB V DC |
| Low U(OA) / U(OB) | 0 ... 1 V DC |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Single device | max.400 ms |
| Switch-on time | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Monitoring output OUT | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT | 1 ... 50 mA |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Switching delay from state change | max.400 ms |
| Monitoring output OUT D | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT D | 1 ... 50 mA |
| Output voltage | |
| OUT D | 0,8xUB ... UB V DC |
| Switching delay from state change | max.700 ms |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Performance Level | PL e |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| PFHD | |
| Head downward or horizontal | 3.1 x 10-9 |
| Head upward | 4.29 x 10-8 |
| Mission time | 20 y |
