We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CTP-L2-AR-M-HA-AZ-SH-123369
Part number
123369
Stock availability:
On request
If you are questing Euchner CTP-L2-AR-M-HA-AZ-SH-123369 123369, catch up with FAMAGA, the world's the best retailer of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of spare parts and private attention to each customer. We praise everyone, who joined with us - so, our regular customers bring in the most helpful purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Cyprus, Suriname, Congo, Mauritius, Mexico, Angola, Lithuania, Lebanon, Turkmenistan, Seychelles, Belgium, Colombia, Kuwait, Egypt, Tajikistan, China, Mongolia, The Gambia, Chad, Algeria, Luxembourg, Mali, Monaco, Netherlands, Philippines, Iraq, East Timor, Andorra, Sweden, New Zealand, Ghana, Burkina Faso, Jamaica, Madagascar, Mauritania, Hungary, Yemen, North Korea, Poland, Norway, Syria, Paraguay, United States, Estonia. A well-built logistics link and a partnership network allow us to deliver our products anywhere in the globe with no delay without disreputing product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or make a request, get in touch with us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
CTP?L2 | Guard locking actuated by power-ON applied and spring released (open-circuit current principle). |
Plug connector (view of connection side) | Pin | Designation | Function | Conductor coloring of connecting cable |
---|---|---|---|---|
1 | IMP | Operating voltage of guard locking solenoid 24 V DC | VT | |
2 | FI1A | Enable input for channel 1 | RD | |
3 | FI1B | Enable input for channel 2 | GY | |
4 | FO1A | Safety output, channel 1 | RD/BU | |
5 | FO1B | Safety output, channel 2 | GN | |
6 | UB | Operating voltage of AR electronics 24 V DC | BU | |
7 | RST | Reset input | GY/PK | |
8 | OD | Door monitoring output | GN/WH | |
9 | OI | Diagnostic output | YE/WH | |
10 | OL | Guard locking monitoring output | GY/WH | |
11 | - | n.c. | BK | |
12 | FE | Function earth (must be connected to meet the EMC requirements) | GN/YE | |
13 | - | n.c. | PK | |
14 | - | n.c. | BN/GY | |
15 | - | n.c. | BN/YE | |
16 | - | n.c. | BN/GN | |
17 | - | n.c. | WH | |
18 | IMM | Operating voltage of guard locking solenoid 0 V | YE | |
19 | 0 V UB | Operating voltage of AR electronics 0 V | BN |
Housing material | |
Switch head cover | Die-cast zinc |
Safety switch housing | Fiber glass reinforced thermoplastic |
Weight | |
Net | 0,42 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... +55 °C |
Degree of protection | IP67 |
Resilience to vibration | In acc. with EN IEC 60947-5-3 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Ready delay | 8 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M23, 19-pin, RC18 |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N |
Retention force | 20 N |
Extraction force | 20 N |
Actuating force | 10 N |
Overtravel | 5 mm |
Test-pulse interval | min.140 ms |
Test pulses | max.1,0 ms |
Operating voltage DC | |
UUB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Current consumption | |
IUB | 40 mA |
IIMP | 400 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 150mA |
Solenoid operating voltage DC | |
UIMP | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 2 A |
External (solenoid operating voltage IMP) | 0,5 ... 8 A |
Rated insulation voltage Ui | max.50 V |
Rated impulse withstand voltage Uimp | max.0,5 kV |
Power consumption | 6 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Risk time according to EN 60947-5-3 | |
Delay per device | 5 ms |
Single device | max.260 ms |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs FO1A / FO1B | |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output FO1A / FO1B | 1 ... 150 mA |
Output voltage | |
Low U(FO1A) / U(FO1B) | 0 ... 1 V DC |
High U(FO1A) / U(FO1B) | UB-1,5 ... UB V DC |
Off-state current Ir | max.0,25 mA |
Switch-on time | max.400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms In acc. with EN IEC 60947-5-3 |
Monitoring output OL | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Monitoring output OD | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Monitoring output OI | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Performance Level | PL e |
Category | 4 |
PFHD | 4.1 x 10 -9 |
Mission time | 20 y |