We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET3-AP-CRA-AH-50X-SA-122406
Part number
122406
Description
Türschalter CET3-AP-CRA-AH-50X-SA-122406
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET3-AP-CRA-AH-50X-SA-122406 122406, get in touch with FAMAGA, the world's foremost distributor of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each purchaser. We respect everyone, who engaged with us - thus, our regular customers procure the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Albania, Sri Lanka, Gambia, Syria, Togo, Czech Republic, Ecuador, Denmark, Sweden, Azerbaijan, Slovenia, Brunei, Nicaragua, Chad, Guatemala, Israel, Djibouti, Netherlands, Malta, Belarus, Paraguay, Malaysia, Philippines, Estonia, Jamaica, Angola, Laos, Russia, South Sudan, Equatorial Guinea, Kuwait, Cape Verde, Costa Rica, Yemen, Thailand, Tajikistan, Iceland, Morocco, Mali, Qatar, Uganda, Latvia, Mauritania. A well-built logistics series and a partnership network guide us to conduct our units anywhere in the world on-time without compromising product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To inquire or place an order, contact us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| CET3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | illuminates when the solenoid is energized |
| LED 2 gn | illuminates when door is closed |
| DIA | Monitoring output (semiconductor) |
| OUT D | Door monitoring output |
| RST | Reset input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Resilience to vibration | In acc. with EN IEC 60947-5-2 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| Z | ±4 mm |
| Y | ±5 mm |
| X | ±5 mm |
| Ready delay | 1 s |
| Switching frequency | max.0,5 Hz |
| Connection | 1 plug connector M12, 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (solenoid operating voltage UCM) | 0,5 ... 8 A |
| External (operating voltage UB) | 0,25 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Connecting cable | 30V DC, 2A |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
| Switching current | |
| Per safety output OA / OB | 1 ... 200 mA |
| Output voltage | |
| Low U(OA) / U(OB) | 0 ... 1 V DC |
| High U(OA) / U(OB) | UB-1,5V ... UB V DC |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Single device | max.400 ms |
| Switch-on time | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Monitoring output DIA | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| DIA | 1 ... 50 mA |
| Output voltage | |
| DIA | 0,8xUB ... UB V DC |
| Switching delay from state change | max.400 ms |
| Monitoring output OUT D | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT D | 1 ... 50 mA |
| Output voltage | |
| OUT D | 0,8xUB ... UB V DC |
| Switching delay from state change | max.700 ms |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head downward or horizontal | 3.1 x 10-9 |
| Head upward | 4.29 x 10-8 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
| Mission time | 20 y |
