We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
MGB-L1-ARA-AN3A1-M-R-121419
Part number
121419
Stock availability:
On request
If you are pursuing Euchner MGB-L1-ARA-AN3A1-M-R-121419 121419, catch up with FAMAGA, the world's main company of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of outcomes and personalseparate attention to each purchaser. We praise everyone, who joined with us - so, our regular consumers pick up the most beneficial purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4 thousand such customers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Morocco, Philippines, Saudi Arabia, Latvia, Bahamas, Mali, Kyrgyzstan, South Sudan, Monaco, Greece, Uzbekistan, Finland, Nigeria, Haiti, Canada, Madagascar, Chile, Georgia, Macedonia, Romania, Nicaragua, Burkina Faso, Mauritania, Yemen, Egypt, United States, Australia, Botswana, Estonia, Iceland, Brunei, Mongolia, Switzerland, Pakistan, Thailand, China, Uganda, South Korea, Peru, United Arab Emirates, Tajikistan. A well-developed logistics connection and a partnership network allow us to dispatch our products anywhere in the planet promptly without disreputing product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, phone us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
MGB-L1... | The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked). |
OD | ON when the door is closed |
OT | Bolt tongue inserted in the evaluation module |
OL | Guard locking solenoid in locked position |
OI | Diagnostics, there is a fault |
S1 | Key-operated rotary switch with 2 positions (form L, 90°). The key latches in both positions and can be removed in both positions. |
S2 | 1 NO contact, illuminated |
S3 | 1 NO contact, illuminated |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 0,75 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Switching frequency | 0,25 Hz |
Connection | Cable entries M20x1.5 |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Rated insulation voltage Ui | 30 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connection cross-section | |
(Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 | 0,25 ... 0,75 mm? |
(Rigid/flexible) | 0,13 ... 1,5 mm? (AWG 24 ... AWG 16) |
(Rigid/flexible) with cable end sleeve according to DIN 46 228/1 | 0,25 ... 1,5 mm? |
Safety class | III |
Discrepancy time | |
Between FO1A and FO1B | max.10 ms |
Risk time according to EN 60947-5-3 | max.350 ms |
Transponder coding | Unicode |
Power supply UB | |
Operating voltage DC | |
UB | 24 V DC -15% ... 10% |
Current consumption | |
IUB | max.80 mA |
Power supply UA | |
Operating voltage DC | |
UA | 24 V DC -15% ... 10% |
Current consumption | |
IUA | max.375 mA |
Safety outputs FO1A, FO1B | |
Test pulses | max.1 ms |
Test-pulse interval | min.100 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
UFO1A /UFO1B LOW | 0 ... 1 V DC |
UFO1A /UFO1B HIGH | UB-2V ... UB V DC |
Output current | |
Per safety output FO1A / FO1B | 1 ... 200 mA |
Monitoring outputs OD, OT, OL, OI | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | UA-2V ... UA V DC |
Output current | max.50 mA |
Controls and indicators | |
Switching voltage | UA V |
Switching current | 1 ... 10 mA |
Breaking capacity | max.0,25 W |
Power supply LED | 24 V DC |
Solenoid control input IMP1, IMP2, IMM | |
Test pulses | max.5 ms |
Test-pulse interval | min.100 ms |
Belegungsschema | L1 |
Position 1 | |
Ausfuhrung | Key-operated switch |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 2 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 3 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Additional feature | Incl. cover set ID. No. 120344 |
Product version number | V3.0.3 |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.7 x 10-9 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 2.8 x 10-9 |
Mission time | 20 y |