We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET3-AP-CRA-AH-50X-SI-C2290-121367
Part number
121367
Stock availability:
On request
If you are questing Euchner CET3-AP-CRA-AH-50X-SI-C2290-121367 121367, call FAMAGA, the world's the best retailer of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and private attention to each purchaser. We understand everyone, who joined with us - so, our regular customers bring in the most acceptable purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Bosnia and Herzegovina, Macedonia, Colombia, Angola, Central African Republic, Guinea, Poland, Swaziland, Andorra, South Korea, Philippines, Hungary, Ireland, Chad, Liechtenstein, Uganda, Madagascar, Kenya, Pakistan, Belize, North Korea, Bulgaria, Ghana, Burundi, Equatorial Guinea, Jordan, Kazakhstan, Libya, Tajikistan, Kyrgyzstan, Moldova, Guatemala, Sudan, Egypt, Zambia, Rwanda, Haiti, Namibia, Tunisia, Senegal, Slovakia, Mongolia, Vietnam. A well-built logistics connection and a partnership network allow us to deliver our goods anywhere in the world with no delay without compromising product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
CET3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | illuminates when the solenoid is energized |
LED 2 gn | illuminates when door is closed |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Resilience to vibration | In acc. with EN IEC 60947-5-2 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
Z | ±4 mm |
Y | ±5 mm |
X | ±5 mm |
Ready delay | 1 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5-pin |
Approach speed | 20 m/min |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (solenoid operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.12 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | 30V DC, 2A |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output OA / OB | 1 ... 200 mA |
Output voltage | |
High U(OA) / U(OB) | UB-1,5V ... UB V DC |
Low U(OA) / U(OB) | 0 ... 1 V DC |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Switch-on time | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Repeat accuracy R | 10 % |
C number | |
C2290 | With wire front release (bowden) mounted |
For the approval according to UL the following applies | |
Operation only with UL class 2 power supply, or equivalent measures see operating instructions | |
Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head downward or horizontal | 4 |
Head upward | 3 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Control of the guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Mission time | 20 y |