We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET3-AP-CRA-AH-50F-SI-C2312-157408
Part number
157408
Stock availability:
On request
If you are looking for Euchner CET3-AP-CRA-AH-50F-SI-C2312-157408 157408, make contact with FAMAGA, the world's key retailer of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and personalseparate attention to each orderer. We praise everyone, who worked with us - so, our regular customers pick up the most desirable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Antigua and Barbuda, Mongolia, Lithuania, Cambodia, Panama, Lebanon, Equatorial Guinea, Kenya, Japan, Denmark, Bhutan, Papua New Guinea, Gambia, Mozambique, Zambia, Togo, South Sudan, Sierra Leone, Kazakhstan, Hungary, Azerbaijan, Burkina Faso, Sudan, Haiti, Libya, Guyana, Liberia, Namibia, Mali, Syria, Paraguay, Cameroon, Austria, Uruguay, Guatemala, Burundi, Luxembourg, Iceland, Zimbabwe, Andorra, Turkey, Jamaica, Slovakia, North Korea. A advanced logistics link and a partnership network cheer us to send our units anywhere in the globe with no delay without compromising product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is growing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as keep on top of it.
To request or book, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
CET3 | Guard locking by spring force. The door position is also monitored. LED 2 illuminates as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). LED 2 also remains on when guard locking is active. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | Voltage at the solenoid |
LED 2 gn | Door position |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Resilience to vibration | In acc. with EN IEC 60947-5-2 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
Z | ±4 mm |
Y | ±5 mm |
X | ±5 mm |
Ready delay | 1 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5-pin |
Approach speed | 20 m/min |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (solenoid operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.12 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | 30V DC, 2A |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output OA / OB | 1 ... 200 mA |
Output voltage | |
High U(OA) / U(OB) | UB-1,5V ... UB V DC |
Low U(OA) / U(OB) | 0 ... 1 V DC |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Switch-on time | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Repeat accuracy R | 10 % |
C number | |
C2312 | Extended escape release |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Control of the guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Monitoring of guard locking and the safety guard position | |
Category | |
Head downward or horizontal | 4 |
Head upward | 3 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Mission time | 20 y |