We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Euchner MGB-L1B-EIA-R-136388 136388, connect FAMAGA, the world's leading producer of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and individual attention to each customer. We cherish everyone, who cooperated with us - therefore, our regular clients obtain the most flexible purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Australia, Dominica, Suriname, Czech Republic, Russia, India, Turkey, Indonesia, Zambia, Estonia, Turkmenistan, Netherlands, Ukraine, Colombia, Romania, Armenia, Honduras, Comoros, Luxembourg, Vietnam, Philippines, Japan, Andorra, Hungary, Djibouti, Rwanda, Albania, East Timor, Botswana, Malaysia, Mauritius, Mexico, Iceland, Syria, Tanzania, Switzerland, Central African Republic, Georgia, Latvia, Madagascar, Jordan, Guatemala, Croatia. A advanced logistics link and a partnership network help us to dispatch our goods anywhere in the world with no delay without disreputing product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this amount is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To inquire or make a request, contact us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Reaction time | |
Guard locking | max.250 ms Switch-off time |
Emergency stop / machine stop | max.100 ms Switch-off time |
Door position | max.250 ms Switch-off time |
Bolt position | max.250 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | |
M12 Power, A-coded | |
M12 Power, A-coded | |
Ethernet/IP cable, Cat. 5e min. | M12 D-coded, screened |
M12 D-coded, screened | |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Ethernet/IP cable, Cat. 5e min. |
Safety class | III |
Transponder coding | Unicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Ethernet/IP |
Safety protocol | CIP Safety |
Belegungsschema | B1 |
Belegungsschema | L1 |
Position 1 | |
Ausfuhrung | Emergency stop illuminated |
Einlegeschild | |
Extras | With adhesive ring |
Farbe | |
Schaltelement | 2 pos. driven NC |
Position 90 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 92 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 93 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 95 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Additional feature | Incl. cover set ID. No. 120344 |
Product version number | V1.2 |
Slide-in label | 4 pcs. without marking |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.37 x 10-9 |
Diagnostic Coverage (DC) | 99 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.91 x 10-9 |
Emergency stop | |
B10D | |
Emergency stop | 0.1 x 106 |
Emergency-stop evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.05 x 10-9 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |