We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Euchner MGB-L1HB-PNA-R-127371 127371, catch up with FAMAGA, the world's central vendor of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and special attention to each client. We praise everyone, who collaborated with us - so, our regular customers procure the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Venezuela, Sri Lanka, Australia, United Arab Emirates, Moldova, Iraq, Slovenia, Mauritius, Israel, Guatemala, Tonga, Mali, Nicaragua, Grenada, Brazil, Fiji, Suriname, Egypt, Finland, China, Jamaica, Iceland, Senegal, Benin, Thailand, Burkina Faso, Angola, Seychelles, Estonia, Tunisia, Sweden, Slovakia, Zambia, Samoa, Georgia, Togo, Syria, East Timor, Kenya, Latvia, Cape Verde. A well-elaborated logistics system and a partnership network allow us to conduct our goods anywhere in the earth with no delay without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or make a request, get in touch with us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Reaction time | |
Emergency stop / machine stop | max.250 ms Switch-off time |
Door position | max.550 ms Switch-off time |
Bolt position | max.550 ms Switch-off time |
Guard locking | max.550 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | |
7/8 Power | |
7/8 Power | |
Acc. to IEC 61076-2-101, Profinet I/O cable, at least cat. 5e | M12 D-coded, screened |
M12 D-coded, screened | |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Profinet I/O cable, at least cat. 5e |
Safety class | III |
Transponder coding | Unicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Profinet (IEC 61158 type 10) |
Safety protocol | Profisafe (IEC 61784-3-3) |
Additional feature | Pre-assembled incl. emergency unlocking |
Product version number | V3.30.10 |
Slide-in label | |
AUTOMATIK START | |
ARRANQUE AUTOMATICO | |
CYCLE STOP / UNLOCK | |
PARO DE CICLO / DESBLOQUEAR | |
ZYKLUS STOP / ENTRIEGELN | |
LOCK | |
BLOQUEAR | |
VERRIEGELN | |
EMERGENCY RELEASE | |
LIBERAR PARO DE EMERGENCIA | |
NOTENTRIEGELUNG | |
AUTO START | |
RESTABLECER | |
Reset |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.07 x 10-8 |
Diagnostic Coverage (DC) | 99 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.91 x 10-8 |
Emergency stop | |
B10D | |
Emergency stop | 0.1 x 106 |
Emergency-stop evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10-8 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 1,00 kg |
Ambient temperature | -20 ... 55 °C |
Degree of protection | IP65 |
Installation orientation | Door hinge DIN right |
Additional feature | With mounting plate and automatic lockout mechanism |
Product version number | V3.0.0 |