We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CTP-L1-AS1B-U-HA-AE-SJ-126644
Part number
126644
Stock availability:
On request
If you are looking for Euchner CTP-L1-AS1B-U-HA-AE-SJ-126644 126644, contact FAMAGA, the world's influential retailer of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each customer. We praise everyone, who cooperated with us - therefore, our regular clients bring in the most flexible purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, San Marino, Dominican Republic, Uruguay, Switzerland, Niger, Bosnia and Herzegovina, Honduras, Haiti, Kyrgyzstan, Mauritania, Denmark, Argentina, South Sudan, Saudi Arabia, Slovakia, Russia, Dominica, Belarus, Pakistan, Estonia, Croatia, Laos, Thailand, Ireland, Australia, Poland, Georgia, Mexico, Serbia, Malta, Syria, Hungary, Greece, Botswana, Philippines, China, Mauritius, Costa Rica, Macedonia, Indonesia, Luxembourg. A well-elaborated logistics link and a partnership network guide us to send our goods anywhere in the world promptly without discrediting product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To inquire or book, contact us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
CTP?L1 | Guard locking actuated by spring force applied and power-ON released (closed-circuit current principle) |
D0, D1 | Door monitoring |
D2, D3 | Guard lock monitoring |
D0 | Guard locking |
Housing material | |
Switch head cover | Die-cast zinc |
Safety switch housing | Fiber glass reinforced thermoplastic |
Weight | |
Net | 0,42 kg |
Ambient temperature | -20 ... +55 °C |
Degree of protection | IP67 / IP69 / IP69K |
Resilience to vibration | In acc. with EN IEC 60947-5-3 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Ready delay | max.1 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M12, 4-pin |
Approach speed | 20 m/min |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N |
Retention force | 20 N |
Extraction force | 20 N |
Actuating force | 10 N |
Overtravel | 5 mm |
ASi voltage | 30 V 26,5 ... 31,6 V |
ASi operating current | 50 mA |
ASi auxiliary voltage | |
IEC 60742, PELV | 24 V -15% ... +10% |
ASi auxiliary current | 400 mA |
ASi slave type | |
According to ASI specification 3.0 | EA code: 7 |
ID code: B | |
ASi data in | |
According to As-i Safety at Work | D1 |
D0 | |
D2 | |
D3 | |
ASi data out | |
Guard locking solenoid | D0 |
Safety class | |
EN IEC 61140 | III |
Repeat accuracy R | 10 % |
Additional feature | Escape release actuated by pushing |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Performance Level | PL e |
Category | 4 |
PFHD | 4.3 x 10 -9 |
Mission time | 20 y |