We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Euchner MGB-L1B-EIA-L-126637 126637, communicate with FAMAGA, the world's chief provider of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are represented in the quality of outputs and private attention to each buyer. We respect everyone, who joined with us - hence, our regular clients get the most desirable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such consumers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Guinea-Bissau, Cuba, Central African Republic, Bolivia, Slovakia, Italy, Canada, Zimbabwe, Czech Republic, Belarus, Eswatini, Moldova, Russia, Chad, Chile, El Salvador, Syria, Burkina Faso, Botswana, Luxembourg, Malaysia, Zambia, Iran, Guatemala, New Zealand, Mozambique, Jamaica, Afghanistan, Peru, North Korea, East Timor, Israel, Mali, Benin, Croatia, Cape Verde, Costa Rica, Haiti, Kiribati, Brunei, Serbia. A well-built logistics chains and a partnership network allow us to dispatch our goods anywhere in the earth on-time without disreputing product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To inquire or book, contact us or write to the online chat on our site. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN left |
Reaction time | |
Emergency stop / machine stop | max.100 ms Switch-off time |
Door position | max.250 ms Switch-off time |
Guard locking | max.250 ms Switch-off time |
Bolt position | max.250 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | M12 Power, A-coded |
Ethernet/IP cable, Cat. 5e min. | M12 D-coded, screened |
M12 D-coded, screened | |
M12 Power, A-coded | |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Ethernet/IP cable, Cat. 5e min. |
Safety class | III |
Transponder coding | Unicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Ethernet/IP |
Safety protocol | CIP Safety |
Belegungsschema | B0 |
Belegungsschema | L1 |
Position 1 | |
Ausfuhrung | Emergency stop illuminated |
Einlegeschild | |
Extras | With adhesive ring |
Farbe | |
Schaltelement | 2 pos. driven NC |
Position 2 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 3 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Additional feature | Incl. cover set ID. No. 120344 |
Product version number | V1.2 |
Slide-in label | 2 pcs. without marking |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.37 x 10-9 |
Diagnostic Coverage (DC) | 99 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.91 x 10-9 |
Emergency stop | |
B10D | |
Emergency stop | 0.1 x 106 |
Emergency-stop evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.05 x 10-9 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |