We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET4-AR-CRA-CH-50F-SG-114650
Part number
114650
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET4-AR-CRA-CH-50F-SG-114650 114650, communicate with FAMAGA, the world's leading retailer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each consumer. We cherish everyone, who cooperated with us - thus, our regular clients obtain the most helpful purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such purchasers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Guinea-Bissau, France, East Timor, Zambia, Costa Rica, Palestine, Sudan, India, Rwanda, Greece, Slovenia, Swaziland, Belgium, Nigeria, Libya, Denmark, Antigua and Barbuda, Norway, Bangladesh, Kuwait, Israel, Albania, Jordan, Paraguay, Chad, Nicaragua, Iran, North Korea, Malta, Afghanistan, Kazakhstan, Jamaica, Iraq, Burundi, Ecuador, Brazil, Sierra Leone, Niger, Uruguay, Uganda, Mauritania, Lithuania, Mali, Bulgaria, Macedonia, Morocco. A advanced logistics link and a partnership network help us to conduct our goods anywhere in the world on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, contact us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
| CET4 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | freely configurable |
| LED 2 gn | illuminates when door is closed |
| OUT | Monitoring output (semiconductor) |
| OUT D | Door monitoring output |
| RST | Reset input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Resilience to vibration | In acc. with EN IEC 60947-5-2 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| Z | ±4 mm |
| Y | ±5 mm |
| X | ±5 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Open-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (solenoid operating voltage UCM) | 0,5 ... 8 A |
| External (operating voltage UB) | 0,25 ... 8 A |
| Power consumption | |
| Solenoid | max.14 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Connecting cable | 30V DC, 2A |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
| Switching current | |
| Per safety output OA / OB | 1 ... 200 mA |
| Output voltage | |
| High U(OA) / U(OB) | UB-1,5V ... UB V DC |
| Low U(OA) / U(OB) | 0 ... 1 V DC |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Delay per device | 5 ms |
| Single device | max.400 ms |
| Switch-on time | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Monitoring output OUT | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT | 1 ... 50 mA |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Switching delay from state change | max.400 ms |
| Monitoring output OUT D | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT D | 1 ... 50 mA |
| Output voltage | |
| OUT D | 0,8xUB ... UB V DC |
| Switching delay from state change | max.700 ms |
| Repeat accuracy R | 10 % |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Mission time | 20 y |
