We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Euchner MGB-L2B-PNC-R-114398 114398, contact FAMAGA, the world's central provider of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of items and special attention to each consumer. We value everyone, who engaged with us - therefore, our regular consumers get the most convenient purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Portugal, Slovenia, Algeria, Pakistan, Sierra Leone, Honduras, Haiti, Luxembourg, Seychelles, Benin, Burma, Australia, Canada, Peru, Afghanistan, Vietnam, Philippines, Togo, Costa Rica, New Zealand, Mozambique, Greece, Jamaica, Latvia, Suriname, Cyprus, Qatar, Montenegro, Indonesia, North Korea, The Bahamas, Georgia, Angola, Mauritania, Ecuador, Belarus, Syria, Mauritius, Israel, Botswana, United States, Swaziland, Cape Verde, Central African Republic. A well-elaborated logistics bond and a partnership network assist us to conduct our items anywhere in the planet immediately without disreputing product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write to the online chat on our site. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Reaction time | |
Enabling switch | max.250 ms Switch-off time |
Guard locking | max.550 ms Switch-off time |
Bolt position | max.550 ms Switch-off time |
Door position | max.550 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | Plug connector RC12 |
According to IEC 61076-3-117 variant 14, screened, Profinet I/O cable, at least cat. 5e | Push-pull RJ45 |
Push-pull RJ45 | |
Push-pull power | |
Push-pull power | |
Guard locking principle | Open-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Profinet I/O cable, at least cat. 5e |
Safety class | III |
Transponder coding | Multicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Profinet (IEC 61158 type 10) |
Safety protocol | Profisafe (IEC 61784-3-3) |
Belegungsschema | B1 |
Belegungsschema | L0 |
Position 90 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | Red |
Schaltelement | 1NO |
Position 91 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | white |
Schaltelement | 1NO |
Position 95 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | Blue |
Schaltelement | 1NO |
Product version number | V3.30.10 |
Slide-in label | |
Storung Quittieren | |
Zutritt Anforderung | |
Automatic Start | |
Failure Reset | |
Access Request | |
Line Start | |
Line Stop | |
S-Zone Reset | |
Automatik Start |
Enabling switch evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10-8 |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.07 x 10-8 |
Diagnostic Coverage (DC) | 99 |
Enabling switch | |
B10D | |
Enabling switch | According to manufacturer’s specifications |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |