We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET3-AP-CRA-AH-50F-SI-114073
Part number
114073
Stock availability:
On request
If you are looking for Euchner CET3-AP-CRA-AH-50F-SI-114073 114073, call FAMAGA, the world's top retailer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of spare parts and special attention to each consumer. We value everyone, who collaborated with us - thus, our regular buyers obtain the most attractive purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Slovenia, Bhutan, Spain, Brazil, Lesotho, Malawi, Sri Lanka, Lithuania, Ghana, Slovakia, Eritrea, Syria, Saudi Arabia, Mali, Senegal, Kiribati, Denmark, Nigeria, Guinea, East Timor, Kazakhstan, Ireland, Andorra, Turkey, Sudan, Kenya, Norway, Kuwait, Iran, United Arab Emirates, Ecuador, Tonga, Malta, Kyrgyzstan, Georgia, Czech Republic, Iraq, Bosnia and Herzegovina, Comoros, Niger, Chile, Uruguay, Laos, Costa Rica. A well-built logistics link and a partnership network assist us to send our goods anywhere in the planet as soon as possible without discrediting product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this bulk is rising every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To request or order, contact us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
CET3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | illuminates when the solenoid is energized |
LED 2 gn | illuminates when door is closed |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Resilience to vibration | In acc. with EN IEC 60947-5-2 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Z | ±4 mm |
Y | ±5 mm |
Ready delay | 1 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5-pin |
Approach speed | 20 m/min |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (solenoid operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.12 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | 30V DC, 2A |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output OA / OB | 1 ... 200 mA |
Output voltage | |
High U(OA) / U(OB) | UB-1,5V ... UB V DC |
Low U(OA) / U(OB) | 0 ... 1 V DC |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Switch-on time | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head downward or horizontal | 4 |
Head upward | 3 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Control of the guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Mission time | 20 y |