We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Euchner MGB-L2B-PNA-L-114045 114045, call FAMAGA, the world's key producer of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each orderer. We value everyone, who worked with us - therefore, our regular buyers pick up the most attractive purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Burma, Eritrea, Sri Lanka, Mauritania, Cuba, Japan, Congo, Botswana, Brunei, Burkina Faso, Liberia, Equatorial Guinea, Monaco, Slovenia, United States, Kuwait, Estonia, Vietnam, Peru, Romania, Algeria, Indonesia, Slovakia, United Arab Emirates, Nepal, Haiti, Djibouti, Togo, New Zealand, Suriname, Kenya, Panama, Qatar, Comoros, Malta, Mexico, Ecuador, Angola, Kazakhstan, Belarus, South Korea, Syria, Samoa, Sierra Leone. A advanced logistics bond and a partnership network cheer us to send our elements anywhere in the world promptly without discrediting product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP54 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN left |
Reaction time | |
Door position | max.550 ms Switch-off time |
Bolt position | max.550 ms Switch-off time |
Guard locking | max.550 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | |
Push-pull power | |
Push-pull power | |
According to IEC 61076-3-117 variant 14, screened, Profinet I/O cable, at least cat. 5e | Push-pull RJ45 |
Push-pull RJ45 | |
Guard locking principle | Open-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Profinet I/O cable, at least cat. 5e |
Safety class | III |
Transponder coding | Unicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Profinet (IEC 61158 type 10) |
Safety protocol | Profisafe (IEC 61784-3-3) |
Product version number | V3.30.10 |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.07 x 10-8 |
Diagnostic Coverage (DC) | 99 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |