We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Euchner MGB-L1B-PNA-L-113613 113613, call FAMAGA, the world's primary producer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and special attention to each orderer. We cherish everyone, who conspired with us - so, our regular buyers obtain the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Barbados, Monaco, Azerbaijan, Lebanon, Paraguay, Belize, Oman, Hungary, Central African Republic, Kazakhstan, El Salvador, Myanmar, Cuba, Rwanda, Sudan, Mali, Nigeria, Honduras, Moldova, Saudi Arabia, Bhutan, Uruguay, Comoros, Armenia, Equatorial Guinea, Turkmenistan, Zambia, Laos, Haiti, Iraq, Serbia, India, Macedonia, Liechtenstein, Turkey, Switzerland, Thailand, Croatia, Nepal, Burundi, Austria, Ghana, The Gambia, Slovakia, Andorra. A well-elaborated logistics network and a partnership network cheer us to send our products anywhere in the earth on-time without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this quantity is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 3,1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP42 |
Resilience to vibration | In accordance with EN 60947-5-3 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN left |
Reaction time | |
Operating mode selector switch | max.220 ms Switch-off time |
Door position | max.550 ms Switch-off time |
Bolt position | max.550 ms Switch-off time |
Guard locking | max.550 ms Switch-off time |
Switching frequency | 0,25 Hz |
Connection | |
7/8 Power | |
7/8 Power | |
Acc. to IEC 61076-2-101, Profinet I/O cable, at least cat. 5e | M12 D-coded, screened |
M12 D-coded, screened | |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Current consumption | max.500 mA |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 0,5 kV |
Maximum feed-in current in the connection block | |
X1, X2 | max.4000 mA |
EMC protection requirements | In accordance with EN 61000-4 and EN 61326-3-1 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connecting cable | |
Ethernet | Profinet I/O cable, at least cat. 5e |
Safety class | III |
Transponder coding | Unicode |
Power supply X1 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Fusing | |
external | min.1 A Slow blow |
Power supply X2 | |
Operating voltage DC | |
L1 | 24 V DC -15% ... 10% |
Auxiliary voltage DC | |
L2 | 24 V DC -15% ... +10% |
Assured switch-off distance Sar | max.65 mm |
Data interface | |
Data protocol | |
Bus protocol | Profinet (IEC 61158 type 10) |
Safety protocol | Profisafe (IEC 61784-3-3) |
Belegungsschema | L1 |
Belegungsschema | B4 |
Position 1 | |
Ausfuhrung | Key-operated switch |
Einlegeschild | |
Extras | |
Farbe | |
Schaltelement | 1NO |
Position 90 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | Printed |
Farbe | white |
Schaltelement | 1NO |
Position 91 | |
Ausfuhrung | Operating mode selector switch |
Einlegeschild | O , I |
Extras | |
Farbe | |
Schaltelement | Code 2 of 3 |
Position 92 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | Printed |
Farbe | white |
Schaltelement | 1NO |
Product version number | V3.30.10 |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.07 x 10-8 |
Diagnostic Coverage (DC) | 99 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.91 x 10-8 |
Selector switch evaluation | |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10-8 |
Safety Integrity Level | SIL 3 (EN 62061:2005) |
Mission time | 20 |