We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET2-AR-CRA-AH-50S-SG-109075
Part number
109075
Stock availability:
On request
If you are seeking Euchner CET2-AR-CRA-AH-50S-SG-109075 109075, reach FAMAGA, the world's top vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are represented in the quality of products and private attention to each buyer. We cherish everyone, who worked with us - hence, our regular clients procure the most helpful purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4500 such consumers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Malta, Eswatini, The Gambia, Antigua and Barbuda, Lebanon, Iraq, India, El Salvador, Nigeria, South Sudan, Costa Rica, Belize, Iran, Latvia, Sudan, Denmark, Belarus, China, Vietnam, North Korea, Guyana, Czech Republic, Mali, Syria, Peru, Uganda, Kazakhstan, Suriname, Tanzania, Slovakia, Armenia, Cameroon, Australia, Laos, Montenegro, Turkey, Botswana, Paraguay, Iceland, Zambia, Ghana, Ukraine, Morocco. A well-elaborated logistics bond and a partnership network assist us to conduct our products anywhere in the earth quickly without undermining product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this quantity is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To request or make a request, phone us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
CET2 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | freely configurable |
LED 2 gn | freely configurable |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
Y | Feedback loop |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Y | ±5 mm |
Z | ±4 mm |
Ready delay | 10 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5 and 8-pin |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
LED1 , LED2 | 24 V DC -15% ... 10% |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Current consumption | |
ICM | 480 mA |
IB | 80 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.14 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Monitoring output OUT | |
Type of output | Semiconductor output, p-switching, short circuit-proof |
Output voltage | |
OUT | 0,8xUB ... UB V DC |
Output current | |
OUT | 1 ... 50 mA |
Feedback loop Y | |
Input voltage | |
Low | 0 ... 1 V DC Feedback loop Y |
High | 15 ... 27,6 V DC Feedback loop Y |
Safety outputs OA/OB | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
Low U(OA,OB) | 0 ... 1 V DC |
High U(OA,OB) | UB-1,5V ... UB V DC |
Output current | |
per safety output | 1 ... 200 mA |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Delay per device | 5 ms |
Switch-on time | |
Safety outputs | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head upward | 3 |
Head downward or horizontal | 4 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Mission time | 20 y |