We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET1-AR-CRA-CH-50X-SG-C2290-109015
Part number
109015
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Euchner CET1-AR-CRA-CH-50X-SG-C2290-109015 109015, catch up with FAMAGA, the world's dominant vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are symbolized in the quality of items and particular attention to each consumer. We value everyone, who worked with us - so, our regular clients procure the most attractive purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Cyprus, Bolivia, Malta, Croatia, Singapore, Italy, Serbia, Tunisia, Albania, Jordan, Bosnia and Herzegovina, Georgia, Sweden, Senegal, Zimbabwe, Switzerland, Kyrgyzstan, Iceland, Macedonia, Panama, Ecuador, Afghanistan, Ireland, Algeria, Greece, Costa Rica, Brunei, Bangladesh, Togo, South Korea, Peru, Qatar, Dominica, Pakistan, Swaziland, Morocco, Brazil, Madagascar, Finland, Botswana, Yemen, Cape Verde, Uganda. A well-built logistics bond and a partnership network help us to conduct our goods anywhere in the planet with no delay without undermining product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this amount is amounting every day. We are happy that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as to stay on the top.
To inquire or order, phone us or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| CET1 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
| LED State | Status LED |
| LED DIA | Diagnostic LED |
| LED 1 rd | illuminates when the solenoid is energized |
| LED 2 gn | freely configurable |
| OUT | Monitoring output (semiconductor) |
| RST | Reset input |
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| X | ±5 mm |
| Y | ±5 mm |
| Z | ±4 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED1 , LED2 | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 8 A |
| External (operating voltage UCM) | 0,5 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Safety outputs OA/OB | |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| High U(OA,OB) | UB-1,5V ... UB V DC |
| Low U(OA,OB) | 0 ... 1 V DC |
| Output current | |
| per safety output | 1 ... 200 mA |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Single device | max.400 ms |
| Delay per device | 5 ms |
| Switch-on time | |
| Safety outputs | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
| Monitoring output OUT | |
| Type of output | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Output current | |
| OUT | 1 ... 50 mA |
| Repeat accuracy R | 10 % |
| C number | |
| C2290 | With wire front release (bowden) mounted |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
| Mission time | 20 y |
