We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CES-AR-CR2-CH-SG-105750
Part number
105750
Description
Induktiver Sicherheitssensor
Stock availability:
On request
If you are pursuing Euchner CES-AR-CR2-CH-SG-105750 105750, call FAMAGA, the world's principle distributor of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are symbolized in the quality of outcomes and special attention to each orderer. We value everyone, who cooperated with us - so, our regular purchasers accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Egypt, Poland, Argentina, United States, Madagascar, Mali, Brunei, Lithuania, Pakistan, Fiji, Netherlands, South Korea, Jamaica, Sierra Leone, Ghana, Czech Republic, Mauritania, Mongolia, Monaco, Ecuador, Sweden, Thailand, Angola, Mozambique, Haiti, Indonesia, Guatemala, Norway, Kuwait, Tonga, United Arab Emirates, Central African Republic, Philippines, Yemen, Nepal, Denmark, Mexico, Cape Verde. A well-elaborated logistics system and a partnership network assist us to ship our elements anywhere in the planet quickly without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are glad that users choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as to stay on the top.
To get some advice or order, get in touch with us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
STATE | Status LED |
DIA | Diagnostics LED |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
Plug connector (view of connection side) | Pin | Designation | Function | Conductor coloring of connection cable |
---|---|---|---|---|
1 | IB | Enable input for channel 2 | WH | |
2 | UB | Power supply, DC 24 V | BN | |
3 | OA | Safety output, channel 1 | GN | |
4 | OB | Safety output, channel 2 | YE | |
5 | OUT | Monitoring output | GY | |
6 | IA | Enable input for channel 1 | PK | |
7 | 0V | Ground, DC 0 V | BU | |
8 | RST | Reset input | RD |
Housing material | Plastic, PBT |
Weight | |
Net | 0,04 kg |
Ambient temperature | -25 ... 65 °C |
Degree of protection | IP67, IP69K |
Resilience to vibration | In acc. with EN IEC 60947-5-2 |
Mounting method | Surface mounting on metal |
Mounting distance | |
Between 2 switches or 2 actuators | min.120 mm |
Installation orientation | Any |
Tightening torque | |
Fixing screws | max.1 Nm |
Ready delay | 10 s |
Switching frequency | max.1 Hz |
Connection | M8 plug connector, 8-pin |
Operating voltage DC | |
UB | 24 V DC 15% ... 15% Regulated, residual ripple < 5 % |
Current consumption | max.50 mA |
Fusing | |
External (operating voltage) | 0,25 ... 8 A |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | max.1,5 kV |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Degree of contamination (external, according to EN 60947-1) | 3 |
Switch-on time | |
Safety outputs | max.400 ms |
Safety class | III |
Risk time according to EN 60947-5-3 | |
Delay per device | 5 ms |
Single device | max.260 ms |
Monitoring output OUT | |
Type of output | p-switching, short circuit-proof |
Switching current | max.50 mA |
Output voltage | 0,8 x UB ... UB V DC |
Safety outputs OA/OB | |
Test pulses | max.1 ms |
Test-pulse interval | min.140 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
per safety output | 1 ... 200 mA |
Output voltage | |
HIGH U(OA) / U(OB) | UB-1,5V ... UB V DC |
LOW U(OA) / U(OB) | 0 ... 1 V DC |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Rated conditional short-circuit current | 100 A |
Off-state current Ir | max.0,25 mA |
Discrepancy time | max.10 ms |
Repeat accuracy R | ? 10 |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures |
Monitoring of the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 1.9 x 10-9 |
Mission time | 20 |
Switch-on distance | 19 mm |
Assured switch-off distance Sar | |
In y direction | max.60 mm |
In x/z direction | max.40 mm |
Assured operating distance Sao | min.14 mm |
Switching hysteresis | min.1 mm |
Switch-on distance | 15 mm |
Assured switch-off distance Sar | |
In x/z direction | max.40 mm |
In y direction | max.60 mm |
Assured operating distance Sao | min.10 mm |
Switching hysteresis | min.1 mm |