We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Euchner CMS-R-AZA-05VL 094702, make contact with FAMAGA, the world's dominant company of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outcomes and individual attention to each consumer. We appreciate everyone, who conspired with us - thus, our regular clients pick up the most beneficial purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, United States, Burkina Faso, Zambia, Moldova, Egypt, Guyana, Morocco, Israel, East Timor, Haiti, Kyrgyzstan, China, Togo, Panama, Pakistan, Malaysia, Fiji, Monaco, Japan, Netherlands, Australia, Guatemala, Belize, Samoa, Niger, Brunei, Yemen, Djibouti, Estonia, New Zealand, Mexico, Suriname, Switzerland, Dominica, Lithuania, Vietnam, Iraq, Mauritania, Sudan, Tajikistan, Afghanistan, Mauritius, Czech Republic, Latvia, Jamaica, Poland, Macedonia. A well-elaborated logistics series and a partnership network guide us to conduct our goods anywhere in the planet on-time without undermining product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Design | A |
Material | |
Cable material | PVC |
Housing material | Fiber glass reinforced PPS |
Weight | |
Net | 0,26 kg |
Ambient temperature | -20 ... 60 °C |
Degree of protection | IP67 |
Mechanical life | 100 x 106 |
Installation orientation | Any, pay attention to marking |
Tightening torque | 0,4 ... 0,5 Nm |
Number of NO contacts | 2 NO contacts with fuse, 100 mA each and 1 NO contact with LED |
Connection | Hard-wired encapsulated cable with cable end sleeves 0.34mm2 |
Cable length | 5 m |
Number of LED displays | 1 LED contact status indication |
Method of operation | Magnetic, reed contact |
Rated conditional short-circuit current | 100 A |
Fusing | |
Power supply / safety contacts, external contact protection | Fuse 10 A gG |
Switching voltage | 24 ... 35 V DC |
Contact status indication | 24 ... 35 V DC |
Switching current | max.100 mA |
Contact status indication | max.20 mA |
Switching characteristics | Parallel |
Switching voltage according to UL | |
According to UL Class 2 | max.24 V AC/DC |
Series resistance | |
LED contact status indication | 1,5 k? |
Switching frequency, electrical | |
At I_min = 10 mA | max.5 Hz |
At nominal current 8 A | 0,1 Hz |
Switching delay from state change | 26 ms |
In compliance with | EN ISO 13849-1: 2015, EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015, EN ISO 14119: 2013, IEC 60947-5-3: 2013 |
Monitoring of the safety guard position | |
B10D | 20 x 106 |
Center offset | |
At s=3 mm read distance | 2,5 mm |
Assured switch-off distance Sar | max.20 mm |
Contact status indication / LED | max.15 mm |
Assured operating distance Sao | |
With center offset m=0 | min.9 mm |
Contact status indication / LED, with center offset m=0 | min.7 mm |