We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Euchner EGT4-2000 094339, reach FAMAGA, the world's central supplier of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of outcomes and personalseparate attention to each orderer. We admire everyone, who cooperated with us - so, our regular customers pick up the most acceptable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4500 such customers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Israel, Austria, Ireland, South Korea, Czech Republic, Equatorial Guinea, Afghanistan, Congo, Belgium, Madagascar, Zambia, Mongolia, Kiribati, Canada, Slovakia, Kenya, Tunisia, Ecuador, Azerbaijan, Gambia, Mauritius, Kyrgyzstan, Croatia, Niger, Mozambique, Uruguay, Central African Republic, Laos, Greece, Costa Rica, Turkey, Algeria, Nigeria, Sierra Leone, Guatemala, Armenia, Libya, Belize, Cameroon, Thailand, Jordan, Indonesia, Iran, Eswatini, Ghana, Peru. A advanced logistics system and a partnership network guide us to deliver our elements anywhere in the planet quickly without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as keep on top of it.
To consult or order, phone us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Design | Thread M18 x 1 |
Housing material | |
Sleeve | Brass, nickel-plated |
Threaded section | Brass, nickel-plated |
Ambient temperature | |
Cable static | -25 ... 70 °C |
Degree of protection | IP67 |
Mechanical life | 0,5 x 106 |
Contact material | Fine silver gold-plated |
Switching principle | Snap-action switching contact |
Repeat accuracy (absolute) | ±0,01 mm |
Installation orientation | Any |
Number of NC contacts | 2 |
Number of NO contacts | 2 |
Connection | PUR cable |
Cable length | 2 m |
Approach speed | 0,01 ... 10 m/min |
Actuating element | Ball plunger |
Actuating force | |
Approx. | 15 N |
Utilization category according to EN 60947-5-1 | |
AC-15 | 2A 230V |
DC-13 | 1A 24V |
Short circuit protection according to IEC 60269-1 | 2A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
min. | 12 V |
Switching current | |
Min. at 24V | 10 mA |
Connection cross-section | 0,5 mm? |