We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Euchner NG1KO-510-M 088604, connect FAMAGA, the world's key distributor of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each consumer. We appreciate everyone, who conspired with us - therefore, our regular customers accept the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Colombia, Malaysia, Tunisia, Bahrain, Djibouti, Cuba, Nepal, Greece, Suriname, Niger, Yemen, Togo, Mexico, Panama, Pakistan, Haiti, The Gambia, Russia, Sierra Leone, Afghanistan, Bulgaria, Guatemala, Chad, Belarus, Mozambique, Georgia, The Bahamas, North Korea, South Korea, Nicaragua, Australia, Seychelles, South Sudan, Albania, United States, Tanzania, Benin, United Arab Emirates, China, Comoros, Bolivia, Central African Republic. A well-built logistics series and a partnership network allow us to deliver our items anywhere in the world as soon as possible without compromising product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
510 | Snap-action switching contact 1 NC + 1 NO |
Housing material | Anodized die-cast alloy |
Weight | |
Net | 0,3 kg |
Ambient temperature | -25 ... 80 °C |
Degree of protection | IP67 |
Mechanical life | 30 x 106 |
Contact material | Silver alloy, gold flashed |
Switching principle | Snap-action switching contact |
Installation orientation | Any |
Number of door position NC contacts | 1 |
Number of door position NO contacts | 1 |
Connection | |
1 x | M20 x 1.5 |
Approach speed | |
max. | 0,01 ... 10 m/min |
Actuating element | Ball plunger |
Actuating force | 15 ... 30 N |
Thermal rated current Ith | 6 A |
Utilization category according to EN 60947-5-1 | |
AC-15 | 6A 230V |
DC-13 | 6A 24V |
AC-12 | 10A 230V |
Short circuit protection according to IEC 60269-1 | |
(Fuse) | 6A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching current | |
Min. at DC 24V | 10 mA |
Connection cross-section | 0,34 ... 1,5 mm? |