We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
EGT12RRSEM4C1888
Part number
079139
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Euchner EGT12RRSEM4C1888 079139, catch up with FAMAGA, the world's primary producer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are represented in the quality of outcomes and individual attention to each buyer. We esteem everyone, who conspired with us - so, our regular clients get the most beneficial purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Cuba, Romania, France, Mexico, Liberia, Angola, Netherlands, Honduras, Laos, Brunei, Syria, Samoa, Botswana, Antigua and Barbuda, Suriname, South Korea, United States, Benin, Guatemala, Uruguay, Estonia, Malaysia, Paraguay, India, Finland, Zimbabwe, Sweden, El Salvador, Egypt, Panama, Fiji, Dominica, Niger, Cyprus, Rwanda, Ireland, Kuwait, Hungary, Latvia, Qatar, Indonesia, Namibia. A well-shaped logistics bond and a partnership network cheer us to dispatch our goods anywhere in the earth quickly without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this amount is increasing every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as keep on top of it.
To inquire or make a request, phone us or write a message to the online chat on our site. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Design | Thread M12 x 1 |
| Housing material | |
| Threaded section | Stainless steel |
| Sleeve | Brass, nickel-plated |
| Ambient temperature | -25 ... 80 °C |
| Degree of protection | IP67 |
| Mechanical life | 5 x 106 |
| Contact material | Rhodium |
| Switching principle | Reed contact |
| Repeat accuracy (absolute) | ±0,01 mm |
| Installation orientation | Any |
| Number of NC contacts | 1 |
| Connection | Plug connector M12 |
| Approach speed | 0,01 ... 20 m/min |
| Actuating element | Roller plunger |
| Actuating force | |
| Approx. | 16 N |
| Utilization category according to EN 60947-5-1 | |
| DC-13 | 0.3A 24V |
| AC-12 | 0.3A 30V |
| Short circuit protection according to IEC 60269-1 | 0.4A gG |
| Rated insulation voltage Ui | 50 V |
| Switching voltage | |
| min. | 1 V |
| Switching current | |
| Min. at 24V | 1 mA |
| C number | |
| C1888 | With wiring according to DESINA |
