We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Euchner NM01AL-M 079117, reach FAMAGA, the world's top provider of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are outlined in the quality of outcomes and special attention to each client. We admire everyone, who collaborated with us - so, our regular buyers receive the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such clients, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Papua New Guinea, Netherlands, Palestine, Latvia, Uzbekistan, Georgia, Monaco, Oman, Lithuania, Swaziland, Mauritius, Botswana, United States, Cameroon, Dominica, Mozambique, Guatemala, Ireland, Mauritania, Uganda, Serbia, Cyprus, Kazakhstan, Nigeria, Pakistan, Gambia, Syria, The Gambia, Belarus, Vietnam, Russia, East Timor, Chile, United Arab Emirates, Czech Republic, Egypt, Morocco, Rwanda, Indonesia, Panama, Yemen, Moldova. A well-shaped logistics chains and a partnership network assist us to conduct our products anywhere in the planet with no delay without discrediting product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as keep on top of it.
To inquire or order, phone us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
ES01 | Slow-action switching contact 1 NC |
Design | Short housing |
Housing material | Reinforced thermoplastic |
Weight | |
Net | 0,1 kg |
Ambient temperature | -20 ... 80 °C |
Degree of protection | IP67 |
Mechanical life | 4 x 106 |
Contact material | Silver alloy, gold flashed |
Switching principle | Slow-action switching contact |
Installation orientation | Any |
Number of door position positively driven contacts | 1 |
Connection | |
1 x | M16 x 1.5 |
Approach speed | |
max. | 60 m/min |
Actuating element | |
Plain bearing plastic | Hinged actuator solid shaft |
Actuation frequency | 5000 1/h |
Actuating torque | 0,1 Nm |
Thermal rated current Ith | 4 A |
Utilization category according to EN 60947-5-1 | |
AC-15 | 4A 230V |
DC-13 | 4A 24V |
Short circuit protection according to IEC 60269-1 | |
(Fuse) | 4A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
Min. at 10mA | 12 V |
Switching current | |
Min. at 24V | 1 mA |
Connection cross-section | 0,34 ... 1,5 mm? |
Monitoring of the safety guard position | |
B10D | 20 x 106 |