Features US Q12
Service voltage: 18 … 30 V DC
No-load current (max.): 40 mA (24 V DC)
Inverse polarity protection: Yes
Short-circuit protection: Yes
Insulation voltage endurance: 500 V
Housing dimensions: 12 x 12 x 75 mm
Housing length: 75 mm
Housing height: 12 mm
Housing width: 12 mm
Transmission exit: radial
Assembly distance (sensor to sensor): 60 mm
Housing material: Aluminum (Black, Anodized)
Material: Epoxy resin, PUR (Transducer surface)
Protection class: III, operation on protective low voltage
Operating principle: Ultrasonic sensor, Ultrasonic sensor
Evaluation: digital
Design: Cuboid design
Characteristics: IO-Link
Parallel operation possible: No
Switching output: Push-pull, 150 mA, NO/NC, switchable
Max. switch current: 150 mA
Voltage drop (max.): 2 V
Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile)
Nominal switching distance (Sn): 200 mm
Range: 20 … 200 mm (adjustable)
Adjustment range: 20 … 200 mm (Teach in)
Resolution: 1,0 mm
Standardized measuring plate: 100 x 100 mm
Switching hysteresis (max.): 2 … 20 mm (Adjustable by IO-Link)
Reproducibility: 0,5 mm
Sensitivity adjustment: Remote teach
Display: LED 1x yellow - Switching output
Ultrasonic frequency: 400 kHz
Switching frequency: 20 Hz
Readiness delay (max.): 300 ms
Shock/vibration load: 30 g, 11 ms / 10 … 55 Hz, 1,0 mm
Ambient temperature during operation: -25 … +70 °C
Temperature drift: 0,2 %/K (uncompensated)
Temperature drift: 1 %/Sn (compensated)
Protection type: IP 67
Connection: Connector, M8, 4-pin
Accessories
Connection cable: TK … /4