We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406297
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472406297, communicate with FAMAGA, the world's chief retailer of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are represented in the quality of merchandises and special attention to each purchaser. We value everyone, who liased with us - thus, our regular purchasers bring in the most helpful purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Namibia, Comoros, Niger, Yemen, Dominican Republic, Uruguay, Madagascar, Mauritius, Singapore, Cameroon, Canada, Malawi, Algeria, Swaziland, Panama, Brunei, The Bahamas, Morocco, Jamaica, Gambia, Tonga, Ireland, Kiribati, Ukraine, Finland, Tajikistan, Haiti, Cape Verde, The Gambia, Denmark, Seychelles, Mali, Belarus, Zimbabwe, Afghanistan, Paraguay, Dominica, Mongolia. A well-elaborated logistics connection and a partnership network assist us to send our goods anywhere in the world promptly without discrediting product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To request or book, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |