We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822240400
Description
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822240400, make contact with FAMAGA, the world's prime producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of goods and personalseparate attention to each consumer. We understand everyone, who collaborated with us - thus, our regular consumers obtain the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Kuwait, Bosnia and Herzegovina, Sweden, Grenada, Burundi, Malawi, Papua New Guinea, Lebanon, Belize, Azerbaijan, Denmark, Pakistan, Saudi Arabia, Tonga, United Arab Emirates, Malta, Turkmenistan, Niger, Georgia, Nicaragua, The Gambia, Greece, Togo, United States, New Zealand, Mozambique, South Korea, Bulgaria, China, Libya, Zambia, Guatemala, Sierra Leone, Swaziland, Bangladesh, Luxembourg, Antigua and Barbuda, Jordan, Macedonia, Latvia. A well-developed logistics bond and a partnership network guide us to send our goods anywhere in the globe on-time without compromising product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |