Aventics (brand of Emerson) R480633348
  Aventics (brand of Emerson) R480633348

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480633348 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480633348

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Piston diameter 200 mm
Piston rod thread M36x2
Standardization ISO 15552
Stroke 25 mm
Sealing material Acrylonitrile butadiene rubber
Scraper Acrylonitrile butadiene rubber
ATEX optional
Compressed air connection G 3/4
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480633348

If you are questing Aventics (brand of Emerson) R480633348, connect FAMAGA, the world's prime vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of products and special attention to each buyer. We understand everyone, who conspired with us - hence, our regular consumers procure the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the globe . A well-built logistics series and a partnership network let us to dispatch our units anywhere in the world quickly without disreputing product quality.

A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of industrial equipment.

All spare parts from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as keep on top of it.

To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features R480633348

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Acrylonitrile butadiene rubber
Nut for piston rod Steel, galvanized
Scraper Acrylonitrile butadiene rubber
Trunnion mounting Nodular graphite iron
Tie-rods Stainless steel