Aventics (brand of Emerson) 2621701070
  Aventics (brand of Emerson) 2621701070

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

2621701070 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

2621701070

Description

Standardization ISO 5599-2
Cable exit straight
Number of valve positions 1
Frame size ISO 1
Housing Die-cast aluminum
Sealing material Aluminum
Subbase Die-cast aluminum
Number of wires 5-pin
Port size M12
Type Plug
Nominal flow Qn 1500 l/min
Compressed air connection input 3/8 NPT
Compressed air connection output 3/8 NPT
Operational voltage AC at 60 Hz 110 V
DC operating voltage 24 V

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 2621701070

If you are looking for Aventics (brand of Emerson) 2621701070, catch up with FAMAGA, the world's chief distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and special attention to each user. We cherish everyone, who engaged with us - therefore, our regular consumers accept the most helpful purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world . A well-elaborated logistics network and a partnership network assist us to send our elements anywhere in the earth on-time without discrediting product quality.

A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of industrial equipment.

All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.

To get some advice or order, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features 2621701070

Version Single plug-in wiring
Standards ISO 5599-2
Compressed air connection according to ISO 5599
Nominal flow Qn 1500 l/min
Working pressure min./max. -0,95 ... 10 bar
Ambient temperature min./max. -10 ... 50 °C
Medium temperature min./max. -14 ... 50 °C
Medium Compressed air
Number of valve positions max. 1
Direction of pneumatic port (1) On the side
Direction of pneumatic port (2,4) On the side
Direction of pneumatic port (12) On the side
Direction of pneumatic port (14) On the side
Exhaust (3,5) uncollected exhaust
Exhaust type Ports separated
Tightening torque for mounting screws 3 Nm
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Housing Die-cast aluminum, painted gray
Surface anodized
Base plate Die-cast aluminum
Seal Aluminum, anodized