We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637940
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637940, connect FAMAGA, the world's principle distributor of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each buyer. We value everyone, who conspired with us - hence, our regular consumers bring in the most convenient purchase forms and discounts on the industrial equipment market. Today, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Eritrea, Georgia, Guyana, Tunisia, Colombia, Guatemala, Luxembourg, Canada, Norway, Togo, Gambia, Ireland, Malawi, Croatia, Liechtenstein, Comoros, Sudan, Andorra, Serbia, Mozambique, Austria, South Korea, Pakistan, Romania, Chile, Mali, Slovakia, East Timor, Bulgaria, Iraq, Angola, Estonia, El Salvador, Panama, Turkey, Malta, Dominica, Bosnia and Herzegovina, Benin, Djibouti, Finland, Australia, Mauritania, Egypt, Brunei, Bolivia. A advanced logistics chains and a partnership network assist us to ship our elements anywhere in the globe promptly without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |