We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822406400
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Stroke | 4 mm |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822406400, get in touch with FAMAGA, the world's foremost distributor of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and private attention to each consumer. We appreciate everyone, who collaborated with us - thus, our regular clients accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uzbekistan, Tonga, Belize, Qatar, Grenada, Israel, Lithuania, China, Nigeria, South Sudan, Hungary, The Bahamas, Eswatini, Angola, Montenegro, Tajikistan, Switzerland, Greece, Kazakhstan, Brunei, Paraguay, Brazil, Saudi Arabia, Gambia, Mozambique, Guatemala, Poland, Sierra Leone, Nepal, Turkmenistan, Malta, Zambia, Cameroon, Ukraine, Suriname, Panama, Algeria, Antigua and Barbuda, Slovakia, Iceland, Argentina, Syria, Kyrgyzstan, Rwanda, Australia, Armenia. A well-built logistics bond and a partnership network let us to send our items anywhere in the world on-time without compromising product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |